Table of Contents
Advertisement
To rename a Bluetooth partnership
1.
Tap Start > Settings > Connections tab > Bluetooth.
2.
Tap and hold the partnership on the Devices tab.
3.
On the shortcut menu, tap Edit.
4.
Enter a new name for the partnership.
5.
Tap Save.
To delete a Bluetooth partnership
1.
Tap Start > Settings > Connections tab > Bluetooth.
2.
Tap and hold the partnership on the Devices tab.
3.
Tap Delete from the shortcut menu.
Beam information using Bluetooth
1.
On your device, tap and hold an item to beam. The item can be an appointment in
your calendar, a task, a contact card, or a file.
2.
Tap Beam [type of item].
3.
Tap the device name to which you want to beam to. The item is then beamed to the
device you selected.
Note
If the device you want to beam to does not appear in the box, make sure that it is turned on,
discoverable, and within close range (10 meters) of your device.
Use a Bluetooth device as a modem
You can use a phone that has Bluetooth capabilities as a modem for your device.
To do so, create a Bluetooth modem connection on your device and then send information to
another device by using Bluetooth. The device relays the information over the network and
then sends back to your device any information that you had requested over the connection.
Once you create a modem connection to the Bluetooth phone, you can reuse it whenever
you want to use the phone as a modem. Make sure that your device and the destination
device are turned on, Bluetooth is turned on, and that the devices are within close range.
To configure and use a Bluetooth device as a modem
1.
On your device, tap Start > Settings > Connections tab > Connections.
2.
Tap Add a new modem connection.
3.
Enter a name for the connection.
Getting Connected 73
Advertisement
Table of Contents
