Beam Information Using Bluetooth - DOPOD U1000 User Manual

7.
Note:
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
6
repeat steps 1 to 3 above. Tap and hold the name of the Bluetooth stereo headset
and tap Set as Wireless Stereo.
Warning!
After pairing the device and the Bluetooth headset or refreshing the pairing, the
headset volume is automatically set to the highest volume. It is recommended to
lower the volume of the headset first before using it.

Beam information using Bluetooth

You can beam information, such as contacts, calendar items, and tasks, as
well as files from your device to your computer or to another Bluetooth-
enabled device.
Note:
If your computer does not have built-in Bluetooth capability, you need to connect
and use a Bluetooth adapter or dongle on your computer.
To beam information from your device to a computer
1.
2.
108
Tap Finish.
Turn on Bluetooth on your device, and make your device visible. For
information about this, see "To turn Bluetooth on and make your
device visible".
You also need to set Bluetooth on your computer to visible mode. Do
one of the following:
•
If your computer has Windows XP SP2 and your computer's built-
in or external Bluetooth adapter is supported by Windows XP
SP2, open Bluetooth Devices from the Control Panel. Click the