Canon FAX-L290 User Manual page 77

• To add fax numbers to a previously
registered group, simply enter them as
explained in this step.
• If you enter the wrong destination, or if
you want to delete a destination
already registered in a group, use ∂ or
¨ to select that entry, then press
Clear.
• To cancel group dialling for the button
or code you selected, press Clear until
all entries are deleted, then press Set.
Press Stop to return to standby mode.
All fax numbers and the name of the
group registered under that button or
code will be deleted.
10
Press Set twice.
11
Use the numeric buttons to enter a
name for the group (max.16
characters, including spaces).
• If you are unsure how to enter
characters, see p. 3-2.
• If you have already registered a name
that you want to keep, ignore this step.
12
Press Set.
13
To continue registering other groups,
repeat the procedure from step 7.
-or-
Press Stop to return to standby mode.
n
• If you registered groups under one-touch speed dialling buttons, use the destination
labels provided with your FAX to label the buttons. Stick the labels above each
corresponding button.
• To check your entries, you can print a list of all the numbers and names registered for
group dialling (1 p. 6-18). You may want to keep this list near your FAX to refer to it when
dialling.
Chapter 6
NAME
Ex:
_
Ex:
Canon GROUP 2_ :1
DATA ENTRY OK
Ex:
04=1-TOUCH SPD
Ex:
15:00 FaxOnly
Speed Dialling
:A
6-15