Follow this procedure to load a stack (maximum 10 mm stack height) of A4-size plain
paper in the multi-purpose tray:
1
Remove the multi-purpose tray cover
from the FAX.
2
Prepare a stack of paper by tapping
it on a flat surface to even its edges.
3
Open the paper guides to the
approximate width of the stack.
4
Insert the stack into the multi-purpose
tray q (print side facing you and top
edge first), then adjust the paper
guides to the width of the paper w.
• Make sure there are no gaps between
the paper guides and the paper stack.
Chapter 2
1
2
2
2-17
Setting Up