Travis Industries 564 Owner's Manual page 9

11 3/4"
NEW WALL CONSTRUCTION
1. Select a suitable location that is not susceptible to
moisture and is away from drapes, furniture and high
traffic.
2. Place the fireplace in the desired location to see how
it will look in the room.
3. Mark the desired location on the floor and store the
fireplace in a safe, dry and dust free location.
4. Use studs to frame an opening of 31 7/8" wide X
26 3/4" high X 11 3/4" deep.
Option #1-The power cord can be lead from behind the trim
and along the wall to an outlet near the fireplace.
Option #2-A new outlet can be installed inside the new frame
construction.
Plug the unit into a 15Amp/120Volt outlet. If the cord does
not reach, you may use an extension cord rated for a
minimum of 1875 watts.
CAUTION
Clearance for air circulation beneath the fireplace insert is
provided by six stand-offs.
DO NOT INSTALL THE FIREPLACE INSERT DIRECTLY ON
CARPET OR SIMILAR SURFACES WHICH MAY RESTRICT
AIR CIRCULATION. If installing the fireplace in a carpeted
area, place a one-piece, solid, flat surface under the fireplace
insert. Ensure that all six of the insert's stand-offs rest
securely on this surface.
26 3/4"
31 7/8"
9