Toyota Tacoma 2006 Operating Manual page 318

06 01.06
Discharged battery
Booster
LS40034
battery
Positive
terminal
("+" mark) Jumper
Positive terminal
cable
("+" mark)
4. Make the cable connections in the or-
der a, b, c, d.
a. Connect the clamp of the positive
(red) jumper cable to the positive (+)
terminal on the discharged battery.
b. Connect the clamp at the other end
of the positive (red) jumper cable to
the positive (+) terminal on the booster
battery.
318
Jumper cable
LS40035
Discharged battery
Booster
battery
Negative terminal
("- " mark)
c. Connect the clamp of the negative
(black) jumper cable to the negative (–)
terminal on the booster battery.
d. Connect the clamp at the other end
of the negative (black) jumper cable to
a solid, stationary, unpainted, metallic
point of the vehicle with the discharged
battery.
The recommended connecting points
are shown in the following illustrations:
2006 TACOMA from Jan.'06 Prod. (OM35865U)
LS40002
Connecting point for 2TR- FE engine
LS40001
Connecting point for 1GR- FE engine