Toyota 2006 Land Cruiser Owner's Manual
  1. Manuals
  2. Brands
  3. Toyota Manuals
  4. Automobile
  5. 2006 Land Cruiser
  6. Owner's manual

Toyota 2006 Land Cruiser Owner's Manual

Hide thumbs Also See for 2006 Land Cruiser:
Table of Contents

Advertisement

Quick Links

Download this manual
Welcome to the growing group of value- conscious people who drive Toyotas. We are proud of the advanced engineering and
quality construction of each vehicle we build.
This Owner's Manual explains the operation of your new Toyota. Please read it thoroughly and have all the occupants
follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble- free motoring. For
important information about this manual and your Toyota, read the following pages carefully.
When it comes to service, remember that your Toyota dealer knows your vehicle very well and is interested in your complete
satisfaction. Your Toyota dealer will provide quality maintenance and any other assistance you may require.
If there is not a Toyota dealer near you, please call the following number:
U.S. OWNERS
:
When traveling in the U.S. mainland or Canada:
D
Toyota Customer Experience Center
Hawaii:
D
Servco Automotive Customer Services
Please leave this Owner's Manual in this vehicle at the time of resale. The next owner will need this information also.
All information and specifications in this manual are current at the time of printing. However, because of Toyota's policy of
continual product improvement, we reserve the right to make changes at any time without notice.
Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may
find some explanations for equipment not installed on your vehicle.
Please access our websites for further information.
The U.S. mainland
www.toyota.com
D
Hawaii
www.toyotahawaii.com
D
2005 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota
Motor Corporation.
2006 L/C100 from Dec.'04 Prod (OM60B63U)
Foreword
Toll- free:1- 800- 331- 4331
Toll- free:1- 888- 272- 5515
i

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2006 Land Cruiser and is the answer not in the manual?

Questions and answers

Related Manuals for Toyota 2006 Land Cruiser

Summary of Contents for Toyota 2006 Land Cruiser

  • Page 1 The U.S. mainland www.toyota.com Hawaii www.toyotahawaii.com  2005 TOYOTA MOTOR CORPORATION All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota Motor Corporation. 2006 L/C100 from Dec.’04 Prod (OM60B63U)

  • Page 2: Important Information About This Manual

    Important information about this manual Safety and vehicle damage warnings Safety symbol Throughout this manual, you will see safety and vehicle dam- age warnings. You must follow these warnings carefully to avoid possible injury or damage. The types of warnings, what they look like, and how they are used in this manual are explained as follows: CAUTION This is a warning against anything which may...

  • Page 3: Occupant Restraint Systems

    None of these systems, either indi- Toyota encourages you and your family to take the time vidually or together, can ensure that there is no injury to read Section 1- 3 of this Owner’s Manual carefully.

  • Page 4: Event Data Recorder

    Toyota recommends you to read the provisions in Sec- D Engine speed tion 1- 3 carefully and refer to them as needed during D Whether the brake pedal was applied or not your time of ownership of this vehicle.
  • Page 5 D SRS airbag deployment data Toyota will not disclose the data recorded in an EDR to a third party except when: D SRS airbag system diagnostic data D An agreement from the vehicle’s owner (or the leas- If your vehicle is equipped with a vehicle stability con-...
  • Page 6 New vehicle warranty Important health and safety information about your Toyota Your new vehicle is covered by the following Toyota limited warranties: D New vehicle warranty CAUTION D Emission control systems warranty D Others WARNING: Engine exhaust, some of its constitu- ents, and a wide variety of automobile compo- For further information, please refer to the “Owner ’s...
  • Page 7 SRS airbag system and seat belt pretensioner system, This vehicle should not be modified with non- genuine be sure to check with your Toyota dealer for precaution- Toyota products. Modification with non- genuine Toyota ary measures or special instructions regarding installa- products could affect its performance, safety or durabili- tion.
  • Page 8 Owner’s Manual. For details about tire infla- belt pretensioner removed and disposed of by a qualified tion pressure and load limits, see pages 320 and service shop or by your Toyota dealer before you dis- 246. pose of your vehicle.
  • Page 9 Leak detection pump On- pavement and off- road driving tips This pump performs fuel evaporation leakage check. This check is done several hours after the engine is This vehicle belongs to the utility vehicle class. Utility turned off. So you may hear sound coming from under- vehicles have a significantly higher rollover rate than neath the luggage compartment for several minutes.
  • Page 11 WE REALLY CARE ABOUT YOU PLEASE BUCKLE UP Toyota has made a special effort to encourage use of seat belts. Toyota belts are: Comfortable Easy to use Convenient We encourage you to use your belts every time you drive.
  • Page 12 U −5 Quick index D If a service reminder indicator or warning buzzer comes on ..D If your vehicle will not start ........D If your engine stalls while driving .
  • Page 13 The Toyota authorized Repair Manual is packed with literally everything you need to know to perform your own maintenance in virtually every area of your new vehicle.
  • Page 14 The repair manual outlines exactly what main− The repair manual for LAND CRUISER may be tenance is required and clearly explains how to do the purchased from any Toyota dealer or the Mate− work yourself step− by− step. rial Distribution Center. To purchase the repair Areas covered include such things as spark plug re−...

  • Page 15: Operation Of Instruments And

    SECTION OPERATION OF INSTRUMENTS AND CONTROLS Overview of instruments and controls Instrument panel overview ........Instrument cluster overview .

  • Page 16: Instrument Panel Overview

    Instrument panel overview "View A 1. Side vents 2. Side defroster outlets 3. Instrument cluster 4. Center vents 5. Electric moon roof switches and/or personal lights 6. Tire selector switch (in the glove box) 7. Glove box 8. Power door lock switches 9.
  • Page 17 "View B (Vehicles with navigation system) 1. Headlight, turn signal and front fog light switches 2. Cruise control switch 3. Ignition switch 4. Wiper and washer switches 5. Emergency flasher switch 6. Navigation system including air condi- tioning controls (See separate “Navigation System Owner’s Manual”.) 7.
  • Page 18 "View B (Vehicles without navigation system) 1. Headlight, turn signal and front fog light switches 2. Cruise control switch 3. Ignition switch 4. Wiper and washer switches 5. Emergency flasher switch 6. Clock, outside temperature and trip in- formation display 7.
  • Page 19 "Lower part of center cluster panel 1. Ashtray 2. Cigarette lighter 3. Power outlet...

  • Page 20: Instrument Cluster Overview

    Instrument cluster overview 11C501b 1. Voltmeter 4. Tachometer 8. Odometer and two trip meters 2. Speedometer 5. Height control indicator light 9. Trip meter reset knob 3. Service reminder indicators and 6. Engine oil pressure gauge 10. Fuel gauge indicator lights 7.
  • Page 21 Indicator symbols on the instrument panel ∗ 1 ∗ 1 Brake system warning light Low tire pressure warning light ∗ 1 ∗ 1 Driver’s seat belt reminder light Unengaged “Park” warning light Automatic transmission fluid temperature warning ∗ 1 Charging system warning light ∗...

  • Page 22: 1 : For Details, See "Service Reminder Indicators And Warning

    Automatic transmission indicator lights Vehicle stability control system off indicator ∗ 1 light Vehicle stability control system and active ∗ 1 traction control system warning light Active traction control system indicator light Slip indicator light ∗ 3 Roll sensing of curtain shield airbags off indicator light ∗...

  • Page 23: Table Of Contents

    SECTION OPERATION OF INSTRUMENTS AND CONTROLS Keys and Doors Keys ............Engine immobilizer system .

  • Page 24: Keys

    When using a key containing a trans- 1. Master keys (black)—These keys work ponder chip, observe the following in every lock. Your Toyota dealer will precautions: need one of them to make a new key with a built- in transponder chip.
  • Page 25 z Do not use the key with electromag- netic materials. z When starting the engine, do not z Do not bend the key grip. use the key with other transponder z Do not cover the key grip with any keys around (including keys of oth- material that cuts off electromagnet- er vehicles) and do not press other ic waves.

  • Page 26: Engine Immobilizer System

    Toyota dealer. need additional keys, duplicates can be the electronic code in the chip corre- made by a Toyota dealer using the key The indicator light stays on except sponds to the registered ID code for number.

  • Page 27: Wireless Remote Control

    The This device complies with Part 15 of the indicator light will go off. FCC Rules. Operation is subject to the For your Toyota dealer to make a new key following two conditions: with a built- in transponder chip,...
  • Page 28 The wireless remote control key is an If you lose your wireless remote control electronic component. Observe the follow- key, contact your Toyota dealer as soon ing instructions in order not to cause dam- as possible to avoid the possibility of age and trouble to the key.
  • Page 29 NOTE: *The 2- step unlocking function can vehicle. be changed. **The turn signal lights can be set not to flash. Ask your Toyota deal- er for details.
  • Page 30 The alarm will last for 1 minute. To stop NOTICE: Connect the equipment into an outlet the alarm midway, push the “PANIC”, This equipment has been tested and on a circuit different from that to “LOCK” or “UNLOCK” switch, or unlock found to comply with the limits for a which the receiver is connected.
  • Page 31 1. Remove the screw, and then the cover. 2. Remove module from z Replace only with same or frame. equivalent type recommended by a Toyota dealer. z Dispose of used battery according to the local laws. Replace the battery by following these procedures:...

  • Page 32: Side Doors

    After replacing the battery, check that the neously.* key operates properly. If the key still does NOTE: *The 2- step unlocking function can not operate properly, contact your Toyota be changed. Ask your Toyota dealer for dealer. details.
  • Page 33 LOCKING UNLOCKING WITH POWER DOOR LOCK SWITCH Push the switch. To lock: Push the switch down on the front side. To unlock: Push the switch down on the l12093a rear side. All the side doors and back door lock or unlock simultaneously.
  • Page 34 —Automatic door locking and unlocking functions AUTOMATIC DOOR LOCKING CAUTION You can select the following functions: Locking linked with the shift posi- Before driving, be sure that the doors tion* closed locked, especially when small children are in the ve- All doors are automatically locked when hicle.
  • Page 35 You can set or cancel the automatic To select the locking linked with the AUTOMATIC DOOR UNLOCKING door locking functions: vehicle speed: You can select the following functions: Be sure to apply the parking brake when 1. Close all doors and turn the ignition Unlocking linked with the ignition performing the following operations.

  • Page 36: Power Windows

    Power windows You can set or cancel the automatic To select the unlocking linked with the unlocking functions: shift position: Be sure to apply the parking brake when 1. Close all doors and turn the ignition performing the following operations. switch to the “ON”...
  • Page 37 Window lock switch 12C011a l12088a 12C007b Automatic operation: Push the switch OPERATING THE PASSENGERS’ WIN- Automatic operation: Push the switch completely down or pull it completely up, DOWS completely down or pull it completely up, and then release it. The window will fully and then release it.
  • Page 38 CAUTION Never leave anyone (particularly a small child) alone in your vehicle, To avoid serious personal injury, you especially with the ignition key still must do the following. inserted. Otherwise, could power window Before you close the power win- switches and get trapped in a win- dows, always make sure there is dow.

  • Page 39: Power Quarter Windows

    Power quarter windows Back door CAUTION To avoid serious personal injury, you must do the following. Before you close the power quarter windows, always make sure there is nobody around the power quarter windows. You must also make sure the hands and other parts of the bodies of all occupants are kept completely inside...
  • Page 40 Pull the handle toward you and pull LOCKING AND UNLOCKING FROM IN- Push the handle and push down the down the lower side of the back door. SIDE lower side of the back door. When closing the back door, make sure To lock: Push the knob.
  • Page 41 CAUTION CAUTION Keep the back door closed while Before driving, be sure that the back driving. This not only keeps the door is closed and locked, especially luggage from being thrown out but when small children are in the ve- also prevents exhaust gases from hicle.

  • Page 42: Hood

    Hood Theft deterrent system To open the hood: 2. In front of the vehicle, pull up the To deter vehicle theft, the system is auxiliary catch lever and lift designed to sound an alarm if any of 1. Pull the hood lock release lever. The hood.
  • Page 43 The system will automatically be set after If any of the side door or back door is 30 seconds. When the system is set, the unlocked without the key or wireless re- indicator light will start flashing again. mote control key and the key is not in the ignition switch, all the side doors and 4.

  • Page 44: Fuel Tank Cap

    CAUTION reconnected. If the system does not work properly, Do not smoke, cause sparks or al- have it checked by your Toyota dealer. low open flames when refueling. The fumes are flammable. When opening the cap, do not re- move the cap quickly. In hot weath-...

  • Page 45: Electric Moon Roof

    CAUTION Make sure the cap is installed se- curely to prevent fuel spillage in the event of an accident. Use only a genuine Toyota fuel tank 12C006b cap for replacement. It is designed to regulate fuel tank pressure. Sliding operation 2.
  • Page 46 If the moon roof can- rear side. switch. not be operated properly, have it checked by your Toyota dealer. The roof will open and stop partway 30 Jam protection function (closing opera- mm (1.2 in.) from the fully opened posi- tion only): If something gets caught be- tion.
  • Page 47 CAUTION Never leave anyone (particularly a small child) alone in your vehicle, To avoid serious personal injury, you especially with the ignition key still must do the following. inserted. Otherwise, could use the moon roof switches While the vehicle is moving, always and get trapped in the roof open- keep the heads, hands and other ing.
  • Page 49 SECTION OPERATION OF INSTRUMENTS AND CONTROLS Occupant restraint systems Seats ............Front seats .

  • Page 50: Seats

    Front seats— —Front seat precautions Seats While the vehicle is being driven, all ve- Driver seat Slightly recline the back of hicle occupants should have the seatback seat. Although vehicle designs vary, upright, sit well back in the seat and prop- CAUTION many drivers can achieve the 250 erly wear the seat belts provided.
  • Page 51 —Seat adjustment precautions Front passenger seat Front seats (with SRS side airbags) CAUTION CAUTION CAUTION Do not adjust the seat while the vehicle is moving as the seat may The SRS front passenger airbag also The SRS side airbags are installed in unexpectedly move and cause the deploys with considerable force, and the driver and front passenger seats.
  • Page 52 —Adjusting front seats 1. SEAT POSITION AND SEAT CUSHION CAUTION ANGLE ADJUSTING SWITCH Move the control switch in the desired Avoid reclining seatback direction. more than needed. The seat belts pro- Releasing the switch will stop the seat at vide maximum protection in a frontal that position.

  • Page 53: Armrest

    Rear seats— —Rear seat precautions Armrest Tumbling the seats will enlarge the lug- CAUTION gage compartment. See “Cargo and lug- gage” on page 247 for precautions when Do not adjust the seat while the loading luggage. vehicle is moving. Be careful that the seat does not hit a passenger or luggage.
  • Page 54 —Moving second seat —Adjusting second seats third seat entry SEATBACK ANGLE ADJUSTING LEVER Lean forward and pull the lever toward you. Then lean back to the desired angle and release the lever. CAUTION Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the second seat passengers are sitting...
  • Page 55 —Tumbling second seat CAUTION After returning the seat, make sure the seat is securely locked by push- ing forward and rearward on the top of the seatback and by trying to pull I13378b I13340a up the edge of the bottom cushion. BEFORE TUMBLING SECOND SEAT 2.
  • Page 56 TUMBLING SECOND SEAT 2. Unlock the seat cushion. Swing the 3. Hook the strap. whole seat up and forward. 1. Lower the outer head restraint to the When returning the second seat to its lowest position and pull up the cen- original position, put the holding strap into ter head restraint.
  • Page 57 CAUTION When returning seats to their original position, observe the following pre- cautions in order to prevent personal injury in a collision or sudden stop: Make sure the seat is securely locked by pushing forward and rear- ward on the top of the seatback and by trying to pull up the edge of the bottom cushion.
  • Page 58 —Adjusting third seats —Tumbling third seats SEATBACK ANGLE ADJUSTING LEVER Lean forward and pull the lever toward you. Then lean back to the desired angle and release the lever. CAUTION I13377b Avoid reclining the seatback any more than needed. The seat belts provide maximum protection in a frontal or rear collision when the third seat passengers are sitting up...
  • Page 59 I13262c 2. Make sure the shoulder belt passes TUMBLING THIRD SEAT 2. Unlock the seat cushion and slide through the hanger when folding the the whole seat the rear- most 1. Lower the head restraint to the low- third seat. position while pulling up the handle.
  • Page 60 13c558 13c559 13c557a 3. Swing the whole seat up. 4. Hook the strap. 5. Remove the seat hook covers from the back of the seat cushion, and When returning the third seat to its origi- install them over the seat hooks. nal position, put the holding strap into the hole.
  • Page 61 —Removing third seats CAUTION When returning seats to their original position, observe the following pre- cautions in order to prevent personal injury in a collision or sudden stop: Make sure the seat is securely locked by pushing forward and rear- ward on the top of the seatback and by trying to pull up the edge of the bottom cushion.

  • Page 62: Head Restraints

    Head restraints CAUTION When reinstalling the seat, be care- ful not to hit the seat against you When removing or reinstalling the or inside of the vehicle. seat, observe the following precau- Install each seat in the same posi- tions to prevent personal injury: tion from which it was removed.

  • Page 63: Seat Heaters

    Seat heaters For your safety and comfort, adjust the Right side CAUTION head restraint before driving. front seat To raise: Pull it up. Occupants must use caution when op- To lower: Push it down while pressing the erating the seat heater because it lock release button.

  • Page 64: Seat Belts

    Seat belts— —Seat belt precautions Toyota strongly urges that the driver and Do not allow any children to stand up or NOTICE passengers in the vehicle be properly re- kneel on either rear or front seats. An strained at all times with the seat belts...
  • Page 65 —Fastening 3- point seat belts CAUTION Be careful not to damage the belt webbing or hardware. Take care that Persons should ride in their seats they do not get caught or pinched properly wearing their seat belts in the seat or doors. whenever vehicle moving.
  • Page 66 If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat until the seat belt is fixed, because it cannot protect an adult occupant or your child from death or serious...
  • Page 67 CAUTION Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be l13197b kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause serious injuries in a collision.
  • Page 68 If the seat belt does not function Keep as low on hips as possible normally, immediately contact your Toyota dealer. Do not use the seat Sit up straight and well back in the Remove excess length of the belt and until the seat belt is fixed, because seat.
  • Page 69 Toyota dealer free of charge. Please contact your local Toyota dealer so that the dealer can order the proper re- quired length for the extender. Bring the heaviest coat you expect to wear for prop- er measurement and selection of length.
  • Page 70 To connect the extender to the seat Toyota dealer. Do not use the seat belt, insert the tab into the seat belt until the seat belt is fixed, because buckle so that the “PRESS” signs on...

  • Page 71: Roll Sensing Of Curtain Shield Airbags Off Indicator Light

    —Seat belt pretensioners CAUTION Make sure the roll sensing of cur- tain shield airbags indicator light is not on. When the roll sensing of curtain shield airbags off switch is turned on (and the roll sensing of curtain shield airbags off indicator light is on), the seat belt pretensioners will not operate in a vehicle rollover and turning off the seat belt preten-...
  • Page 72 Failure to follow these instructions can result in death or serious inju- by the airbag sensor assembly. The airbag ries. Consult your Toyota dealer sensor assembly consists of a safing sen- about any repair and modification. sor and airbag sensor.

  • Page 73: Buzzers" On

    If any of the following conditions occurs, NOTICE this indicates a malfunction of the airbags or seat belt pretensioners. Contact your Do not perform any of the following Toyota dealer as soon as possible. changes without consulting your Toyota dealer.

  • Page 74: Srs Driver Airbag And Front Passenger Airbag

    In the following cases, contact your Toyota The SRS (Supplemental Restraint Sys- close proximity to the airbag which dealer as soon as possible:...
  • Page 75 The SRS front airbags will deploy if the child restraint system. Toyota severity of the impact is above the de- strongly recommends that all in- signed threshold level, comparable to an fants and children be placed in the...
  • Page 76 The front airbag sensors constantly moni- tor the forward deceleration of the vehicle. If an impact results in a forward decelera- tion beyond the designed threshold level, Hitting a curb, Falling into or the system triggers the airbag inflators. At edge of pavement jumping over a this time a chemical reaction in the inflat-...
  • Page 77 These Toyota strongly recommends that: er wears the seat belt even if not are usually in the nature of minor burns wearing it.
  • Page 78 “Child restraint” on page 78. Do not sit on the edge of the seat Toyota strongly recommends that all or lean against the dashboard when infants and children be placed in the vehicle is in use, since the...
  • Page 79 Do not put anything or any part of z Modification of the front end struc- Consult your Toyota dealer about any your body on or in front of the ture repair and modification.
  • Page 80 The light comes on or starts flashing while driving. The indicator comes on when the igni- In the following cases, contact your Toyota tion key is turned to the “ON” position. dealer as soon as possible: It goes off after about 6 seconds. This...
  • Page 81 SRS side airbags and curtain shield airbags with roll sens- ing function In response to a severe side impact, the CAUTION SRS side airbags and curtain shield air- bags on impacted side work with the seat The SRS side airbag and curtain belts to help reduce injury by inflating.
  • Page 82 Toyota tion where the inflation is not desired strongly recommends that all in- (such as extreme- off road driving). fants and children be placed in the rear seats of the vehicle and prop- erly restrained.
  • Page 83 CAUTION Make sure the roll sensing of cur- tain shield airbags indicator light is not on. Collision from the rear When the roll sensing of curtain shield airbags off switch is turned on (and the roll sensing of curtain shield airbags off indicator light is Collision from the front on), the curtain shield airbags will not inflate in a vehicle rollover and...
  • Page 84 Collision from Collision from the front the rear The angle of Skidding vehicle vehicle tip- up hitting a curb is marginal stone Pitch end over end The curtain shield airbags may not acti- The curtain shield airbags may inflate The curtain shield airbags are generally vate if the vehicle is subjected to a if the angle of vehicle tip- up is margin- not designed to inflate if the vehicle is...
  • Page 85 The SRS side airbag and curtain shield airbag system is controlled by the airbag sensor assembly. The airbag sensor as- sembly consists of a safing sensor and airbag sensor. In a severe side impact, the side and Falling into or jump- Hitting a curb, edge of 13c538c curtain shield airbag sensor and/or the...
  • Page 86 When the airbags inflate, they produce a CAUTION fairly loud noise and release some smoke and residue along with non- toxic gas. This SRS side airbags and curtain shield does not indicate a fire. This smoke may airbags inflate with considerable remain inside the vehicle for some time, force.
  • Page 87 Sit up straight and well back in the seat, distributing your weight evenly in the seat. Do not apply excessive weight to the outer side of the seats with a side airbag and to the front and rear pillar, front, center and rear garnish and roof interior 13c563 with the curtain shield airbag.
  • Page 88 Do not allow anyone to kneel on the passenger seat, facing the pas- senger’s side door, since the side airbag and curtain shield airbag could inflate with considerable speed and force. Otherwise, he/she may be killed or seriously injured. Special care should be taken espe- cially when you have a small child in the vehicle.
  • Page 89 Do not hook a hanger, heavy or Do not disassemble or repair the sharp pointed objects on the coat front and rear pillars and roof side hook. If the curtain shield airbags rails containing the curtain shield inflate, those items will be thrown airbags.
  • Page 90 Toyota dealer. Such changes can in- cidentally, resulting in death or seri- terfere with proper operation of the ous injury. For details, see “Roof SRS side airbag and curtain shield luggage carrier”...
  • Page 91 If any of the following conditions occurs, In the following cases, contact your Toyota this indicates a malfunction of the airbags dealer as soon as possible: or seat belt pretensioners. Contact your Any of the SRS side airbags and cur- Toyota dealer as soon as possible.

  • Page 92: Child Restraint

    Child restraint— —Child restraint precautions Toyota strongly urges the use of ap- Toyota strongly urges use of On vehicle with side airbags and propriate child restraint systems for proper child restraint system which curtain shield airbags, do not allow children.
  • Page 93 —Types of child restraint system —Child restraint system A child restraint system for a small Child restraint systems are classified into Make sure you have complied with child or baby must itself be properly the following 3 types depending on the all installation instructions provided restrained on the seat with the lap por- child’s age and size.
  • Page 94 —Installation with 2- point type seat belt (A) Infant seat (C) Booster seat (A) INFANT SEAT INSTALLATION An infant seat must be used in rear- facing position only. (B) Convertible seat...
  • Page 95 1. Run the center lap belt through or Contact your Toyota dealer CAUTION around the infant seat following the immediately. Do not install the child instructions provided by its manufactur- restraint system on the seat until...
  • Page 96 2. While pressing the infant seat firmly 3. To remove the infant seat, press the CAUTION against the seat cushion and seatback, buckle release button. tighten the lap belt by pulling its free Push and pull the child restraint sys- end to hold the infant seat securely.
  • Page 97 (B) CONVERTIBLE SEAT INSTALLATION 1. Run the center lap belt through or CAUTION around the convertible seat following A convertible seat must be used in for- instructions provided ward- facing or rear- facing position de- Do not install a child restraint system manufacturer and insert the tab into pending on the age and size of the on the third seat if it interferes with...
  • Page 98 2. While pressing convertible seat Contact your Toyota dealer CAUTION firmly against the seat cushion and immediately. Do not install the child seatback, tighten the lap belt by pulling restraint system on the seat until...
  • Page 99 —Installation with 3- point type seat belt 13c565 13c564 3. To remove the convertible seat, press (A) INFANT SEAT INSTALLATION CAUTION the buckle release button. An infant seat must be used in rear- facing position only. Never install a rear- facing child re- straint system on the front passen- ger seat.
  • Page 100 1. Run the lap and shoulder belt through Contact your Toyota dealer Do not install a child restraint sys- or around the infant seat following the immediately. Do not install the child tem on the third seat if it interferes...
  • Page 101 2. Fully extend the shoulder belt to put it 3. While pressing the infant seat firmly CAUTION in the lock mode. When the belt is against the seat cushion and seatback, then retracted even slightly, it cannot let the shoulder belt retract as far as Push and pull the child restraint sys- be extended.
  • Page 102 13c566 13c567 4. To remove the infant seat, press the (B) CONVERTIBLE SEAT INSTALLATION CAUTION buckle release button and allow the A convertible seat must be used in for- belt to retract completely. The belt will ward- facing or rear- facing position de- Never install a rear- facing child re- move freely again and be ready to pending on the age and size of the...
  • Page 103 On vehicle with side airbags and curtain shield airbags, do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front or rear pillar, front, center or rear 13c568 13c501b garnish or roof interior from which...
  • Page 104 1. Run the lap and shoulder belt through 2. Fully extend the shoulder belt to put it Contact your Toyota dealer or around the convertible seat following in the lock mode. When the belt is immediately. Do not install the child...
  • Page 105 3. While pressing convertible seat 4. To remove the convertible seat, press CAUTION firmly against the seat cushion and the buckle release button and allow the seatback, let the shoulder belt retract belt to retract completely. The belt will Push and pull the child restraint sys- as far as it will go to hold the convert- move freely again and be ready to tem in different directions to be sure...
  • Page 106 On vehicle with side airbags and curtain shield airbags, do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front or rear pillar, front, center or rear 13c569 garnish or roof interior from which 13c570...
  • Page 107 Always make sure the shoulder belt child from death or serious injury. is positioned across the center of Contact your Toyota dealer child’s shoulder. The belt should be immediately. Do not install the child kept away from child’s neck, but...
  • Page 108 —Using a top strap Symbol 13C001 Anchor brackets 2. To remove the booster seat, press the Follow the procedure below for a child Use the anchor bracket located behind the buckle release button and allow the restraint system that requires the use second seat on the floor to attach the top belt to retract.
  • Page 109 13C003 13C005 13C004 TO USE THE ANCHOR BRACKET: 2. Fix the child restraint system with 4. Replace the head restraint. the seat belt. 1. Remove the head restraint. 3. Take off the cover, latch the hook onto the anchor bracket and tighten the top strap.
  • Page 110 —Installation with child restraint lower anchorages 13C529 13c571 13C532f Most upright position The lower anchorages for the child re- CHILD RESTRAINT SYSTEM INSTALLA- 2. Take off the cover between the seat TION cushion and seatback and confirm straint system interfaced with the position of the lower anchorages FMVSS225 specification are installed in...
  • Page 111 3. Type A—Latch the hooks of lower CAUTION straps onto anchorages tighten the lower straps. When using the lower anchorages Type B—Latch the buckles onto the for the child restraint system, be anchorages sure that there are no irregular ob- 13C009b If your child restraint system has a top jects around the anchorages or that...
  • Page 113 SECTION OPERATION OF INSTRUMENTS AND CONTROLS Steering wheel and Mirrors Power tilt and telescopic steering wheel ..... . . Outside rear view mirrors .

  • Page 114: Power Tilt And Telescopic Steering Wheel

    This feature can be set inoperative. Ask ries. your Toyota dealer.

  • Page 115: Outside Rear View Mirrors

    —Power rear view mirror control Outside rear view mirrors— CAUTION Do not adjust the mirror while the vehicle is moving. Doing so may cause the driver to mishandle the vehicle and an accident may occur resulting in death or serious inju- ries.

  • Page 116: Anti- Glare Inside Rear View Mirror

    Anti- glare inside rear view mirror— —Folding rear view mirrors NOTICE If ice should jam the mirror, do not operate the control or scrape the mir- ror face. Use a spray de- icer to free the mirror. 13C010b The rear view mirrors can be folded Adjust the mirror so that you can just backward for parking in compact areas.
  • Page 117 —Compass (vehicles without navigation system) When the ignition key is inserted and turned on, the inside rear view mirror al- ways turns on in the “AUTO” mode. When the inside air temperature is low, it may take a little longer for the mirror to darken in response to the detection of 13c570b 13c013...
  • Page 118 Pushing the “AUTO” button for longer NOTICE 3 seconds turns on or off the compass display. Do not put magnets or a metal object near the inside rear view mirror. Do- The compass may not show the correct ing this may cause malfunction of the direction in the following conditions: compass sensor.
  • Page 119 If the direction is displayed several sec- onds after adjustment, the calibration is finished. CAUTION Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped. 13C015b Zone number L Hawaii is included in zone 6.
  • Page 120 Do not adjust the display while the If calibration cannot be performed because vehicle is moving. Be sure to adjust of the magnetized vehicle, etc., take your the display only when the vehicle is stopped. vehicle to Toyota dealer.

  • Page 121: Sun Visors

    Sun visors— —Vanity mirror To block out glare, move the sun visor. To block the glare from the front when the To use the vanity mirror, swing down main sun visor is swung down, swing the main sun visor and open the cover. To block out glare from the front—Swing down the second sun visor.
  • Page 123 SECTION OPERATION OF INSTRUMENTS AND CONTROLS Lights, Wipers and Defogger Headlight and turn signals ........Emergency flashers .

  • Page 124: Headlight And Turn Signals

    NOTE: *The operating condition or sensi- tivity can be changed. Ask your Toyota dealer for details. HEADLIGHTS The automatic light control sensor is on the top of the passenger’s side instrument...
  • Page 125 “LOCK” but- ton on the wireless remote control key turns off the headlights. NOTE: *The time before turning off the lights can be changed. Ask your Toyota dealer for details. NOTICE To prevent the battery from being dis-...

  • Page 126: Emergency Flashers

    Emergency flashers Instrument panel light control NOTICE To prevent the battery from being dis- charged, do not leave the switch on longer than necessary when the en- gine is not running. To turn on the emergency flashers, To adjust the brightness of the instru- push the switch.

  • Page 127: Front Fog Lights

    Front fog lights Interior lights To turn on the interior light, slide the switch. The interior light switch has the following positions: “ON”—Keeps the light on all the time. “OFF”—Turns the light off. “DOOR”— —Center: Turn the light on when any of side doors and back door are opened.

  • Page 128: Personal Lights

    One front door will be closed with the lock knob pushed forward while the other doors are locked. NOTE: *The interior lights can be set not to come on or the duration of lighting can be changed. Ask your Toyota dealer for details. Center...

  • Page 129: Ignition Switch Light

    Ignition switch light Windshield wipers and washer To turn on the personal light, push the switch on 1 side. To turn the lights off, push the switch on 2 side. PERSONAL LIGHTS CUT OFF OPERA- TION When the ignition switch is “OFF” and any personal lights in the vehicle stay lighting on, the lights will cut off automatically after 30 minutes.

  • Page 130: Rear Window Wiper And Washer

    If a nozzle becomes blocked, To squirt washer fluid on the rear window, twist the knob upward or downward as far contact your Toyota dealer to have the as it will go (position 3 or 4). The knob vehicle serviced.

  • Page 131: Rear Window Defogger

    Rear window defogger Outside rear view mirror heaters Make sure you turn the defogger off when the surfaces are clear. Leaving the defog- ger on for a long time could cause the battery discharge, especially during stop- and- go driving. The defogger is not designed for drying rain water or for melt- ing snow.
  • Page 132 CAUTION Since the mirror surfaces can get hot, do not touch them when the mirror heater switch is on. Make sure you turn the mirror heaters off when the surfaces are clear. Leaving the mirror heaters on for a long time could cause the battery to discharge, especially during stop- and- go driving.

  • Page 133: Engine Oil

    SECTION OPERATION OF INSTRUMENTS AND CONTROLS Gauges, Meters and Service reminder indicators Fuel gauge ..........Engine coolant temperature gauge .

  • Page 134: Fuel Gauge

    Fill the fuel tank immediately. The indicator lamp goes off after driving several times. If the indicator lamp does not go off, contact your Toyota dealer as soon as possible. 15C004 The gauge indicates the approximate...

  • Page 135: Engine Oil Pressure Gauge

    If the engine oil pressure should stay be- low the normal range, pull off the road to a safe place and stop the engine immedi- ately. Call a Toyota dealer or qualified repair shop for assistance. Engine oil pressure may not build up when the engine oil level is too low.

  • Page 136: Voltmeter

    Voltmeter Tachometer NOTICE Do not let the indicator needle get into the red zone. This may cause severe engine damage. The voltmeter tells whether the battery The tachometer indicates engine speed is charged discharged. Check in thousands of rpm (revolutions per while the engine is running—the needle minute).

  • Page 137: Odometer And Two Trip Meters

    Odometer and two trip meters 3. Trip meter reset knob—Resets the two trip meters to zero, and also change the meter display. To change the meter display, quickly push and release the knob. The meter display changes in the order from the odometer to trip meter A to trip meter B, then back to the odometer each time you push.

  • Page 138: Service Reminder Indicators And Warning Buzzers

    Service reminder indicators and warning buzzers If the indicator or buzzer comes on... Do this. If parking brake is off, stop immediately and contact Toyota dealer. (indicators and buzzer) Fasten driver’s seat belt. (indicators and buzzer) Fasten front passenger’s seat belt.
  • Page 139 If the indicator or buzzer comes on... Do this. Take vehicle to Toyota dealer immediately. Take vehicle to Toyota dealer. If brake system warning light is also on, stop immedi- ately and contact Toyota dealer. Close all side doors and back door.
  • Page 140 It is dangerous to continue driving Depressing the brake pedal repeatedly a safe place and contact your Toyota normally when the brake fluid level is may turn on the warning light and dealer.

  • Page 141: Engine Oil

    “START”, the reminder light flashes if a You need to reset the light after the en- safe place and contact your Toyota passenger sits in the front passenger seat gine oil replacement. Reset the light by dealer.
  • Page 142 Have your vehicle the tank as soon as possible. after taking several driving trips. checked by your Toyota dealer as soon as If the lamp will not go off even after sev- possible. eral trips, contact your Toyota dealer as Even if the abnormality of the electronic soon as possible.
  • Page 143 Contact your After about 6 seconds, the light will go pretensioners have a problem. Toyota dealer as soon as possible to off. This means the system of the air- service the vehicle. bag and front seat belt pretensioners (i) “ABS”...
  • Page 144 Although it is no problem to continue If the light does not go off, call a Toyota (j) Open Door Warning Light driving, have your vehicle checked by...
  • Page 145 OFF” indicator light come on, have your the key when you open the driver’s door 5. Turn the ignition key to “ON”, but do vehicle checked by Toyota dealer as soon with the ignition key in the “ACC” or not start the engine.

  • Page 146: Trip Information Display

    Trip information display (vehicles without navigation system) The following information is shown with Average vehicle speed Driving distance after engine starting the ignition key turned on. Each time The average vehicle speed is calculated The driving distance after engine start- you push the “MODE”...
  • Page 147 Available driving range Average fuel consumption after re- Current fuel consumption fueling The available driving range is calcu- The current fuel consumption is calcu- lated and displayed depending on the The average fuel consumption after re- lated and displayed based on the driv- amount of remaining fuel.
  • Page 149 ..........Active height control suspension (AHC) ..... . . Skyhook TEMS (Skyhook Toyota electronic modulated suspension)

  • Page 150: Ignition Switch

    Ignition switch “ACC”—Accessories such as the radio Several hours after the engine is turned operate, but the engine is off. off, you may hear a sound coming from underneath the luggage compartment for If you leave the key in the “ACC” or several minutes.

  • Page 151: Automatic Transmission

    Automatic transmission Selector lever position P: Parking, engine starting and key removal position R: Reverse position N: Neutral position D: Normal driving position (Shifting into overdrive position) 4: Position for engine braking (Shifting into overdrive not possible) 3,2: Position for more powerful engine braking L: Position for maximum engine braking "...
  • Page 152 Your automatic transmission has a shift 3. Release the parking brake and brake Shift into the “L” position. The trans- lock system to minimize the possibility of pedal. Depress the accelerator pedal mission will downshift to first gear incorrect operation. This means you can slowly for smooth starting.
  • Page 153 (c) Using “3”, “2” and “L” positions (d) Backing up NOTICE The “3”, “2” and “L” positions are used for 1. Bring the vehicle to a complete stop. z Be careful not to over-rev the en- strong engine braking as described pre- 2.
  • Page 154 If the four–wheel drive control is in the When towing a trailer, in order to main- For ordinary driving, Toyota recommends “N” position while the selector lever is in tain engine braking efficiency, do not using the Normal mode to improve fuel the “P”...

  • Page 155: Four-Wheel Drive System

    Four–wheel drive system— (a) Four–wheel drive contro l (i) If you cannot shift the selector le- Use the center differential lock system if ver out of “P” position your wheels get stuck in a ditch, or when you are driving on a slippery or bumpy If you cannot shift the selector lever from surface.
  • Page 156 “H” (high speed position, center differ- In this mode, the braking feeling that oc- The center differential lock system opera- ential unlocked): Lever at “H”, center dif- curs when the wheels are negotiating a tion is not completed within 5 seconds ferential lock button left out sharp corner is further reduced than in the while the cruise control system is set,...
  • Page 157 (b) Shifting procedure Use the “L” position of the automatic SHIFTING BETWEEN “H” (UNLOCKED) NOTICE AND “H” (LOCKED) transmission lever for maximum power and traction when your wheels get stuck For normal driving on dry and hard shift between unlock lock or when you drive down a steep incline.

  • Page 158: Active Traction Control System

    If the “VSC/TRAC” warning light comes controlling the output of the brake and on, have your vehicle checked by your engine. Thus, the system assists driver Toyota dealer as soon as possible. control driving power wheels. When you turn the ignition...
  • Page 159 (The continuous buzzer sounds for about In the following cases, contact your Toyota snow tires or tire chains. Always 3 seconds.) At the time, the “VSC/TRAC”...

  • Page 160: Vehicle Stability Control System

    When replacing the tires or wheels, The system activates when the vehicle substitute for safe driving practices. contact your Toyota dealer. (See speed is about more than 15 km/h (9 Factors including speed, road con- “Checking and replacing tires” on mph).
  • Page 161 If the “VSC/TRAC” warning light and “VSC OFF” indicator light come on, have your vehicle checked by your Toyota dealer as soon as possible. However, there is no problem if the “VSC/TRAC” warning light comes on when the brake actuator tem- perature becomes high.

  • Page 162: Tire Pressure Warning System

    320. In the following cases, contact your Toyota “ON” position and goes off after a few dealer: If the low tire pressure warning light seconds.
  • Page 163 Stop your vehicle at a safe place as soon CAUTION Each tire, including the spare (if pro- as possible and check that the tire infla- vided), should be checked monthly tion pressure is as specified on the tire If the low tire pressure warning light when cold and inflated to the inflation and loading information label.
  • Page 164 20 minutes and increase the tire placed by the nearest Toyota dealer reasons, including the installation of inflation pressure by 20 to 30 kPa. or authorized tire dealer.
  • Page 165 Non- genuine Toyota wheels are used. residential installation. This equipment generates, uses and can radiate radio Snow tires or tire chains are used.
  • Page 166 Have the tires, wheels or sensors the tires of this vehicle. Increase the separation between the replaced and ID codes registered by equipment and receiver. Toyota dealer. If you need sensors, When replacing the wheels, be sure to purchase from Toyota dealer. install tire...
  • Page 167 To initialize the system, perform the fol- lowing: 1. Park the vehicle at a safe place and apply the parking brake. Stop the en- gine. 2. Adjust the pressure of all the installed 16C523 16C522a tires to the specified level. (See “Tires”...
  • Page 168 —Selector switch If the low tire pressure warning light does ID codes should be registered by Toyota not blink when you push and hold the dealer. Once registered, change the set- reset switch, have the tire pressure warn- ting position each time you purchase tires ing system checked at your Toyota dealer.

  • Page 169: Parking Brake

    Parking brake Cruise control The cruise control allows you to cruise CAUTION the vehicle at a desired speed over about 40 km/h (25 mph) even with your Before driving, be sure the parking foot off the accelerator pedal. brake is fully released and the park- Your cruising speed can be maintained ing brake reminder light is off.
  • Page 170 CAUTION To help maintain maximum control of your vehicle, do not use the cruise control when driving heavy or varying traffic, or on slip- – pery (rainy, icy or snow covered) or winding roads. Avoid vehicle speed increases when driving downhill.
  • Page 171 To decrease the vehicle speed, reset to a slower speed with the cruise If this is the case, contact your Toyota control lever or depress the brake pedal. dealer and have your vehicle inspected. If you use the brake pedal, cruise control...

  • Page 172: Active Height Control Suspension (Ahc)

    Active height control suspension (AHC) (a) Vehicle height modes When the vehicle exceeds the specified vehicle speed, vehicle height “HI” (high) mode— changes to the following: The vehicle height is about 40 mm (1.6 With the four- wheel drive control lever in.) higher at front and about 50 mm at “H”...
  • Page 173 Extra high mode— “N” (normal) mode— (b) Automatic leveling function Regardless of the number of occupants This mode automatically selected The vehicle height in this mode is stan- from the high mode with the four- wheel dard. or the luggage loading condition, the vehicle height is always automatically drive control lever placed in “L”...
  • Page 174 (c) Vehicle height mode changing In the following cases the active height condition control suspension does not operate even if the above conditions are all To change the vehicle height, it is nec- met. essary to meet the following 3 condi- tions.
  • Page 175 The vehicle height cannot be raised if Selecting the high mode— NOTICE the vehicle load exceeds the following Push the height select switch on the “ ” limits: z If you change the vehicle height fre- side when the vehicle speed is under quently, the pump may overheat.
  • Page 176 NOTICE CAUTION Do not select the low mode in the If you drive through deep water over bumpy roads. If the underbody of the about 500 mm (20 in.) in depth, put vehicle touches the rugged road sur- the vehicle height in the HI (High) face, the vehicle may be damaged.
  • Page 177 z If your vehicle gets ditched, turn off the active height control suspension with height control switch. Otherwise, the vehicle height may change because of the automatic leveling function, resulting in an ac- cident. Even after the active height control suspension is turned off with the height control switch, if the vehicle speed ex- ceeds 30 km (19 mph), the active height...
  • Page 178 2. When the active height control suspen- height control suspension checked by your 2. The selected mode indicator light goes sion is turned on, the present mode Toyota dealer as soon as possible. indicator light goes off and the ready off. (The...
  • Page 179 “OFF” indicator blinks again, bring your load capacity. After warming up the en- start the engine, the vehicle returns to the vehicle to your Toyota dealer as soon as previous height. gine, push the control switch on the “ ”...

  • Page 180: Skyhook Tems (Skyhook Toyota Electronic Modulated Suspension)

    Skyhook TEMS (Skyhook Toyota electronic modulated suspension) We recommend you to select the mode 2 for ordinary driving. The damping effect will be changed automatically to provide good riding comfort. When your vehicle is loaded heavily or you are driving in an unpaved road, the mode 3 or 4 will be recommended.
  • Page 181 SECTION OPERATION OF INSTRUMENTS AND CONTROLS Audio system Reference ..........Using your audio system .

  • Page 182: Audio System

    —some basics Reference This section describes some of the basic SWITCHING BETWEEN FUNCTIONS features on Toyota audio systems. Some Push “AM·SAT”, “FM”, “TAPE” or “DISC” information may not pertain to your sys- if the system is already on but you want tem.
  • Page 183 Satellite tuner technology notice: TONE AND BALANCE You must enter into a separate service Toyota’s satellite radio tuners are awarded For details about your system’s tone and agreement with the XM radio in order to Type Approval Certificates from XM Satel-...
  • Page 184 For the installation performed during antenna extension. The of the window tint, consult with maximum extension length is 850 mm your Toyota dealer. (33.5 in.). Every time you turn the radio on, the antenna will extend to its previous posi- tion.
  • Page 185 YOUR COMPACT DISC PLAYER CAUTION When you insert a disc, gently push it in with the label side up. Before extending the antenna, confirm The discs set in the player are played that no one is close enough to get continuously, starting with disc number 1.
  • Page 186 —Controls and features Details of specific buttons, controls, and features are described in the alphabetical list that follows. 17c517d...
  • Page 187 The button number will appear on the *: Use of satellite radio requires XM tuner the discs will be automatically cancelled. display. and service. Contact your Toyota dealer for details. (Program) To tune in to a preset station: Push the button for the station you want.
  • Page 188 “AM” to switch from cassette or compact display. *: Use of satellite radio requires XM tuner disc operation to radio operation. To stop the tape while it is fast forward- and service. Contact your Toyota dealer AUDIO- TUNE Knob ing, push fast...
  • Page 189 After FM button your vehicle to your Toyota dealer. pushing the button, insert a compact disc. Push “FM” to turn on the radio and select DISC At this time, the indicators on both sides the FM band. “FM1” or “FM2” will appear of the slot are flashing.
  • Page 190 Loading multiple compact discs— RAND (Random) RDS (Radio Data System) display To load multiple compact discs, push and There are two random features—you can The radio will automatically switch to the hold (until you hear a beep when the au- either listen to the tracks on all the com- RDS mode to receive an RDS station dio system is on).
  • Page 191 The player will repeat all the tracks on the the surrounding antenna cable. See a another channel. disc you are listening to. When the disc Toyota certified dealer. “– – –”: The channel you selected is no ends, the player will automatically go back “UPDATING”: longer available.
  • Page 192 *: Use of satellite radio requires XM tuner XM satellite radio*— Compact Disc Player and service. Contact your Toyota dealer You can either scan the currently selected There are two scan features—you can ei- for details. channel category or scan only the preset...
  • Page 193 *: Use of satellite radio requires XM tuner After the beginning of the tape is the amount of channel separation to prev- and service. Contact your Toyota dealer reached, the player will automatically ent the weak signal from creating noise.
  • Page 194 : Use of satellite radio requires XM tun- If the entire disc or track title does not er and service. Contact your Toyota appear on the display, push and hold the If the entire the message is not displayed, dealer for details.

  • Page 195: Audio System Operating Hints

    *: Use of satellite radio requires XM tuner RADIO RECEPTION Each time you push the “ ” or “ ”, the and service. Contact your Toyota dealer Usually, a problem with radio reception program type changes as in the following: for details.
  • Page 196 *: Use of satellite radio requires XM tuner ened, and there is another strong station and service. Contact your Toyota dealer nearby on the FM band, your radio may for details. tune in the second station until the origi-...

  • Page 197: Is Recommended

    CARING FOR YOUR CASSETTE PLAYER Avoid using cassettes with a total play- If this equipment does cause harmful AND TAPES ing time longer than 100 minutes (50 interference to radio or television re- minutes per side). The tape used in For the best performance for your cas- ception, which can be determined by these cassettes is thin and could get...
  • Page 198 CARING FOR YOUR COMPACT DISC PLAYER AND DISCS The player is intended for use with 12 cm (4.7 in.) discs only. Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.
  • Page 199 NOTICE Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be impossible to eject the disc.

  • Page 200: Rear Seat Audio System

    Rear seat audio system (b) When the radio mode is selected “ ” button: Push this button to select a preset station on the preset but- ton of the front audio system. Each push of the button changes to the station with higher numbered preset button.

  • Page 201: Audio Remote Controls (Steering Switches)

    Audio remote controls (steering switches) (c) When the “TAPE” mode is selected (e) Some basics “ PROG ” button: Push this button This system cannot be used if the audio to select the other side of a cassette system is not turned on. tape.
  • Page 202 XM satellite radio*— To select a preset channel, push the “ ” or “ ” side of the switch. Repeat until a desired channel is found. *: Use of satellite radio requires XM tuner and service. Contact your Toyota dealer for details.

  • Page 203: For Vehicle Equipped With Navigation System, Please Refer To The Separate "Navigation System Owner's Manual

    SECTION OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Front air conditioning system: Controls ..........Air flow selector settings .

  • Page 204: Front Air Conditioning System: Controls

    Front air conditioning system— —Controls 1. Temperature selector knob 2. “AUTO” button 3. Temperature display 4. Fan speed display 5. Air flow display 6. “MODE” button 7. “A/C” button 8. Windshield air flow button 9. Fan speed control button 10. Air intake control button 11.

  • Page 205: Is Recommended

    “AUTO” button “MAX COLD” appears when you adjust to maximum cooling, and “MAX HOT” ap- For automatic operation of the air condi- pears when you adjust to maximum warm- tioning, press the “AUTO” button. An indi- ing. cator light will illuminate to show that the automatic operation mode has been se- “OFF”...

  • Page 206: Is Recommended

    4. Floor/Windshield—Air flows mainly When the “A/C” button is not pressed in, from the floor vents and windshield pressing “MODE” button turns off the air vents. conditioning. It is recommended that you close the For details about air flow selector setting, lower vent.
  • Page 207 If this happens, take your ve- hicle to a Toyota dealer for service. Air intake control button Press the button to select the air source. An indicator light will illuminate to show which air intake mode is being selected.

  • Page 208: Air Flow Selector Settings

    —Air flow selector settings 17C001a “Instrument panel vents” described below.

  • Page 209: Operating Tips

    —Operating tips To cool off your Toyota after it has If following another vehicle on a dusty Heating been parked in the hot sun, drive with road, or driving in windy and dusty For best results, set controls to: the windows open for a few minutes.
  • Page 210 Air conditioning Defogging Defrosting For best results, set controls to: The inside of the windshield The outside of the windshield For best results, set controls to: For best results, set controls to: Fan speed—“AUTO” Temperature— To the desired Temperature— Towards high temperature Temperature—Towards high temperature temperature to heat;...

  • Page 211: Instrument Panel Vents

    —Instrument panel vents Center vents Lower vent If air flow control is not satisfactory, check the instrument panel vents. The instrument panel vents may be opened or closed as shown. For removing frost or fog, it is recom- mended that you close the lower vent when you use the “Floor”, the “Floor/Wind- shield”...

  • Page 212: Rear Air Conditioning System

    Rear air conditioning system— —Controls 1. Rear air conditioning on- off switch 2. “AUTO” button 3. Air flow selector 4. Fan speed selector 5. Temperature selector 6. “OFF” button 18c507b...
  • Page 213 Rear air conditioning on- off switch Temperature selector To turn the rear air conditioning on, press Move the lever to adjust the tempera- the “REAR” switch. To turn the rear air ture—to the right to warm, to the left to conditioning off, press the switch again.

  • Page 214: Air Flow Selector Settings

    —Air flow selector settings 18c508a Warm air Cool air...
  • Page 215 SECTION OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Clock ............Outside temperature display .

  • Page 216: Clock

    Clock Outside temperature display To reset the hour: Push the “H” button. To reset the minutes: Push the “M” button. The key must be in the “ACC” or “ON” position. If quick adjustment to a full hour is de- 18C510 sired, push the “:00”...

  • Page 217: Rear View Monitor System

    Rear view monitor system The display indicates between the range The rear view monitor system assists CAUTION of –22°F and 122°F. the driver by displaying an image of the rear of the vehicle while backing The key must be in the “ON” position. Never depend on rear...
  • Page 218 When replacing the tires, please consult If the back of the vehicle is hit, the your Toyota dealer. If you replace the position and mounting angle of the tires, the area displayed on the screen camera may change. Be sure to may change.
  • Page 219 AREA DISPLAYED ON SCREEN When water droplets are adhering to the camera, or when humidity is high Image is displayed approximately level (for example, when it rains) on screen. When foreign matter (for example, The area detected by the camera is snow or mud) adheres to the camera limited.

  • Page 220: Cigarette Lighter And Ashtray

    Do not hold the cigarette lighter pressed mitted by the camera, the light source appears to have a vertical streak above and below it. Use a Toyota genuine cigarette lighter or equivalent for replacement.

  • Page 221: Power Outlets

    Power outlets The power outlets are designed for power supply for car accessories. To use them, open the lids as shown in the following illustrations. The key must be in the “ACC” or “ON” position to be used. NOTICE z To prevent the fuse from being blown, do not use the electricity over the total vehicle capacity of...

  • Page 222: Roll Sensing Of Curtain Shield Airbags Off Switch

    Roll sensing of curtain shield airbags off switch In a severe side impact, the curtain shield CAUTION airbags on impacted side will inflate even if the roll sensing function is turned off. Make sure the roll sensing of cur- If the ignition switch is turned to “ACC” or off indicator light tain shield airbags “LOCK”...

  • Page 223: Rear Console Box

    Rear console box Glove box Garage door opener Buttons Indicator light To use the rear console box, open as To use the glove box, do this. The garage door opener (HomeLink shown in the illustration. Universal Transceiver) is manufactured un- To open: Pull the lever.
  • Page 224 The battery side of the hand- held trans- mitter must be pointed away from the HomeLink during the programming pro- HomeLink cess. For Canadian users, follow the procedure 19C514 19C515 in “Programming an entrance gate/Pro- gramming all devices in the Canadian 25 to 75 mm market”.
  • Page 225 6. Repeat steps 2 through 5 for each re- 1. Locate the “training” button on the ceil- maining HomeLink button to program ing mounted garage door opener motor. another device. The exact location and color of the button may vary by brand of garage Programming a rolling code system door opener.
  • Page 226 To program other devices such as home 1. Decide which of the 3 HomeLink but- security systems, home door locks or tons you want to program. lighting, contact your authorized Toyota dealer for assistance. 2. Place your hand- held gate/device 19C517 transmitter 25 to 75 mm (1 to 3 in.)
  • Page 227 FCC Rules and with RSS- 210 of the IC celver call the: When programming the HomeLink Rules. Operation is subject to the fol- Toyota Customer Experience Center at Universal Transceiver, you may be lowing two conditions: (1) This device 1- 800- 331- 4331 (U.S.A.)

  • Page 228: Auxiliary Boxes

    Auxiliary boxes— To use the auxiliary boxes, open as shown in the following illustrations. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep the auxiliary box closed while driving. Type A (luggage compartment) Type C (rear console) Type B (luggage compartment)

  • Page 229: Cup Holders

    —First- aid kit holder —Warning reflector holder Cup holders The cup holder is designed for holding cups or drink- cans securely. To use them, observe the following illustra- tions. CAUTION Do not place anything else other than cups or drink- cans in the cup holder, such items...
  • Page 230 19C008 For front seats For front seat For second seats The cup holder can be adjusted to the To use a cup holder in the console box. size of cups by changing the separator 1. Open the console box lid. Pull down position or moving the separator arms.

  • Page 231: Card Holder

    Card holder Tie- down hooks For third seats (left- hand side) You can store a card in the slot as To secure your luggage, use the tie- shown in the illustration. down hooks as shown above. See “Cargo and luggage” on page 247 for precautions when loading luggage.

  • Page 232: Cargo Net Hooks

    Cargo net hooks Roof luggage carrier Side Cross knobs rails Upper knob Roof rails These hooks are designed to hang car- The roof luggage carrier consists of ADJUSTING THE POSITION OF CROSS go net. roof rails and sliding cross rails. RAILS: To hang the cargo net, use the cargo net 1.
  • Page 233 Follow the manufacture’s instructions and precautions when installing the attach- ments or their equivalent. CAUTION When you load cargo on the roof lug- gage carrier, observe the following: Place the cargo so that its weight is distributed evenly between the front and rear axles.

  • Page 234: Floor Mat

    Floor mat If driving for a long distance, on rough roads, or at high speeds, stop the vehicle now and then dur- ing the trip to make sure the cargo remains in its place. Do not exceed 70 kg (154 lb.) cargo weight on the roof luggage carrier.

  • Page 235: Coat Hooks

    Coat hooks To use the coat hook, push the hook. CAUTION Do not hook a hanger, heavy or sharp pointed object on the coat hook. If curtain shield airbags inflate, those items will be hurled away with great force or the curtain shield air- bags may not active correctly.

  • Page 237: Engine Oil

    ........Your Toyota’s identification .

  • Page 238: Off- Road Vehicle Precautionss

    Off- road vehicle precautions This vehicle belongs to the utility ve- CAUTION hicle class, which has higher ground clearance and narrower tread in relation Always observe the following precau- to the height of its center of gravity to tions to help minimize the risk of se- make it capable of performing in a wide rious personal injury or damage to variety of off- road applications.

  • Page 239: Break- In Period

    To help prevent gas station mix- ups, your hicle more sensitive side to the future economy and long life of Toyota has a smaller fuel tank opening. winds than an ordinary passenger your vehicle: The special nozzle on pumps with un- car. Slowing down will allow you...

  • Page 240: Higher Is Recommended

    10% ethanol or 15% Automotive manufacturers in the U.S., heavy knocking. If it is severe, this will MTBE. If you use gasohol in your Toyota, Europe and Japan have developed a lead to engine damage. be sure that it has an octane rating no low-...

  • Page 241: Fuel Pump Shut Off System

    Operation in foreign countries GASOLINE QUALITY The fuel pump shut off system stops sup- If you plan to drive your Toyota in plying fuel to the engine when the engine another country... In a very few cases, you may experience stalls or an airbag inflates upon collision.

  • Page 242: Three- Way Catalytic Converter

    Use only unleaded gasoline. vehicle in for a check- up as soon emission control devices installed in as possible. Remember, your Toyota z Do not drive with an extremely low the exhaust system. dealer knows your vehicle and its fuel level;...

  • Page 243: Engine Exhaust Cautions

    It gases to be drawn into the vehicle. Toyota Maintenance Schedule. For can cause unconsciousness or even To allow proper operation of your scheduled maintenance information, death.

  • Page 244: Facts About Engine Oil Consumption

    (1.1 qt./600 miles, 0.9 Imp.qt/600 regularly. Toyota recommends that the oil by the high temperature combustion miles) level be checked every time you refuel gases during the combustion process.

  • Page 245: Iridium- Tipped Spark Plugs

    In this case, the brakes may not work ity. properly. If they do not work well, depress the brake pedal firmly. If the brake system warning light comes on, immediately stop your vehicle and contact your Toyota deal-...
  • Page 246 The brake system warning light may stay ANTI- LOCK BRAKE SYSTEM Depressing the brake pedal on slippery on for about 60 seconds after the ignition (with “ABS” warning light) road surfaces such as on a manhole cov- key is turned to “ON” position. It is nor- er, a steel plate at a construction site, The anti- lock brake system is designed mal if the light turns off after a while.
  • Page 247 CAUTION Anti- lock brake system is not de- signed to shorten the stopping dis- overestimate anti- lock tance: Always drive at a moderate brake system: Although the anti- lock speed and maintain a safe distance brake system assists in providing ve- from the vehicle in front of you.
  • Page 248 Toyota dealer. When the “ABS” warning light is on (and Have your Toyota dealer perform the bed- In this case, not only the anti- lock the brake system warning light is off), the ding- down.

  • Page 249: Brake Pad Wear Limit Indicators

    Toyota CAUTION dealer as soon as possible. Expensive ro- tor damage can result if the pads are not Do not allow more than one person replaced when necessary. to get on the rear step bumper at a time.

  • Page 250: Limited- Slip Differential

    This is the primary identification number Use only a spare tire of the same for your Toyota. It is used in registering size, construction and load capacity the ownership of your vehicle. as the original tires on your Toyota...

  • Page 251: Theft Prevention Labels

    —Engine number Theft prevention labels Suspension and chassis Your new vehicle carries theft preven- CAUTION tion labels which are approximately 56 mm (2.20 in.) by 16 mm (0.63 in.). Do not modify the suspension/chassis The purpose of these labels is to reduce with lift kits, spacers, springs, etc.

  • Page 252: Tire Information

    Tire information— —Tire symbols This illustration indicates typical tire symbols. 1. Tire size—For details, see “Tire size” on page 240. 2. DOT Tire Identification Number (TIN)—For details, see “DOT and Tire Identification Num- ber (TIN)” on page 239. 3. Tire ply composition and materi- als—Plies mean a layer of rubber- coated parallel cords.
  • Page 253 —DOT and Tire Identification Number (TIN) 7. “TUBELESS” or “TUBE TYPE” The “DOT” symbol certifies that the —A tubeless tire does not have a tire conforms to applicable Federal tube inside the tire and air is direct- Motor Vehicle Safety Standards. ly filled in the tire.
  • Page 254 —Tire size —Name of each section of tire 20c506a 21A007a 21A006a This illustration indicates typical tire 1. Section width 1. Bead size. 2. Tire height 2. Sidewall 1. Tire (P=Passenger car, 3. Wheel diameter 3. Shoulder T=Temporary use) 4. Tread 2.
  • Page 255 150 would wear conditions on specified government purchasers of Toyota vehicles with in- one and a half (1- 1/2) times as well test surfaces of asphalt and concrete. formation on uniform tire quality grad-...
  • Page 256 Temperature A, B, C—The tempera- ture grades are A (the highest), B, and C, representing the tire’s resis- tance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
  • Page 257 —Glossary of tire terminology Tire related term Meaning tire inflation pressure when the vehicle has been parked for at least 3 hours Cold tire inflation pressure or more, or it has not been driven more than 1.5 km or 1 mile under that condition the maximum cold inflation pressure to which a tire may be inflated and it is Maximum inflation pressure...
  • Page 258 Tire related term Meaning the combined weight of those installed regular production options weighing over 2.3 kg (5 lb.) in excess of those standard items which they replace, not pre- Production options weight viously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim Vehicle capacity weight the rated cargo and luggage load plus 68 kg (150 lb.) times the vehicle’s desig-...
  • Page 259 Tire related term Meaning the load on an individual tire that is determined by distributing to each axle Vehicle normal load on the tire its share of the curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1 that follows) and dividing by two Weather side the surface area of the rim not covered by the inflated tire Table 1–...

  • Page 260: Vehicle Load Limits

    Vehicle load limits Vehicle load limits include total load NOTICE CAUTION capacity, seating capacity, towing ca- pacity and cargo capacity. Follow the Even if the number of occupants Do not apply the load more than load limits shown below. Total load ca- are within the seating capacity, each load limit.

  • Page 261: Cargo And Luggage

    Cargo and luggage— —Stowage precautions When stowing cargo and luggage in NOTICE D Never allow anyone to ride in or on the vehicle, observe the follow- the luggage compartment. It is ing: Do not load the vehicle beyond not designed for passengers. the vehicle capacity weight giv- D Put cargo and luggage in the lug- They should ride in their seats...
  • Page 262 —Capacity and distribution Cargo capacity depends on the to- 4. The resulting figure equals the tal weight of the occupants. available amount of cargo and lug- gage load capacity. For example, (Cargo capacity) = (Total load capac- if the “XXX” amount equals 1400 ity) –...
  • Page 263 379 kg – 176 kg = 203 kg. CAUTION (834 lb. – 388 lb. = 446 lb.) Weight of removed As shown in the above example, if the third seat Even if the total load of occu- number of occupants increases, the pant’s weight and the cargo load Cargo cargo and luggage load equaling the...

  • Page 264: Types Of Tires

    Types of tires Determine what kind of tires your All season tires, however, do not have vehicle is originally equipped with. adequate traction performance compared with snow tires in heavy or 1. Summer tires loose snow. Also, all season tires fall Summer tires are high- speed capabil- short in acceleration and handling ity tires best suited to highway driving...
  • Page 265 SECTION STARTING AND DRIVING Before starting the enginee ........How to start the engine .

  • Page 266: Before Starting The Enginee

    How to start the engine— (a) Cranking hold function Before starting the engine (b) Before cranking 1. Check the area around the vehicle be- Once you turn the ignition key to “START” 1. Apply the parking brake firmly. fore entering it. position and release it, the cranking hold 2.

  • Page 267: Tips For Driving In Various Conditions

    To dry them, drive vehicle cautiously while lightly pressing the brake pedal with the park- ing brake applied. If they still do not work safely, pull to the side of the road and call a Toyota dealer for assistance.

  • Page 268: Off- Road Driving Precautions

    Off- road driving precautions When driving your vehicle off- road, please CAUTION Do not drive in excess of the speed observe the following precautions to en- limit. Even if the legal speed limit sure your driving enjoyment and to help Before driving off, make sure the permits it, do not drive over 140 prevent the closure of areas to off- road...
  • Page 269 U.S. Forest Service and Bureau of NOTICE After driving through tall grass, Land Management mud, rock, sand, rivers, etc., check z If driving through water, such as that there is no grass, bush, paper, CAUTION when crossing shallow streams, rags, stone, sand, etc. adhering or first check the depth of the water trapped on the underbody.

  • Page 270: Winter Driving Tips

    See page 315 for recommended viscosity. selection. Supplement”. Leaving a heavy summer oil in your ve- “Toyota Super Long Life Coolant” is a mix- hicle during winter months may cause ture of 50% coolant and 50% deionized harder starting. If you are not sure about water.

  • Page 271: Dinghy Towing

    When parking, put the transmission into overload your vehicle or trailer. Ask your “P” and block the front wheels. Do not local Toyota dealer for further details be- use the parking brake, or snow or water fore towing. accumulated in and around the parking...
  • Page 272 WEIGHT LIMITS CAUTION Trailer hitch assemblies have differ- Before towing, make sure the total trail- ent weight capacities established by er weight, gross combination weight, The maximum gross trailer weight the hitch manufacturer. Even though gross vehicle weight, gross axle weight (trailer weight plus cargo weight) the vehicle may be physically capa- and trailer tongue load are all within...
  • Page 273 The load on either the front or rear Total trailer weight Tongue load axle resulting from distribution of the gross vehicle weight on both axles must not exceed the Gross Axle Weight Rating (GAWR) listed on the Certification Label. 20c508 Tongue load ∗...
  • Page 274 If you wish to install a trailer hitch, you weight in the back than in the Do not use axle- mounted hitches as should consult with your Toyota dealer. front. About 60% of the trailer load they can cause damage to the axle...
  • Page 275 Trailer Class Typical Trailer Ball Size 2 in. 2 in. 1 7/8 in. 2. Select the appropriate trailer ball to match exceed gross trailer weight rating of the trailer. The trailer ball load rating should be printed on the top of the ball. 3.
  • Page 276 220 (32) Never tap into your vehicle’s hy- BRAKES AND SAFETY CHAINS Rear 240 (35) draulic system as it would lower its Toyota recommends trailers with See Section 7- 2 and Section 8 for in- braking effectiveness. brakes that conform to any applica- structions.
  • Page 277 BREAK- IN SCHEDULE 3. Turn the ignition switch on or push the height control switch to turn on the Toyota recommends that you do not active height control suspension. Select tow a trailer with a new vehicle or a the “N” (normal) mode with the height vehicle with any new power train com- select switch.
  • Page 278 4. Turn the ignition switch on or push the Check that your rear view mirrors con- Avoid jerky starts or sudden accelera- height control switch to turn on the form to any applicable federal, state/ tion. active height control suspension. provincial or local regulations.
  • Page 279 Crosswinds and rough roads will ad- Because of the added load of the trail- When restarting out after parking on a versely affect handling of your vehicle er, your vehicle’s engine may overheat slope: and trailer, causing sway. Pay attention on hot days temperatures over 1.

  • Page 280: How To Save Fuel And Make Your Vehicle Last Longer, Too

    How to save fuel and make your vehicle last longer, too Improving fuel economy is easy–just take Avoid engine over-revving. Use a CAUTION it easy. It will help make your vehicle last gear position suitable for the road on longer, too. Here are some specific tips which you are travelling.
  • Page 281 Keep front wheels in proper CAUTION alignment. Avoid hitting the curb and slow down on rough roads. Improper Never turn off the engine to coast alignment not only causes faster tire down hills. Your power steering and wear but also puts an extra load on brake booster will not function with- the engine, which, in turn, wastes fuel.

  • Page 283: In Case Of An Emergency

    SECTION IN CASE OF AN EMERGENCY If your vehicle will not startt ........If your engine stalls while driving .

  • Page 284: If Your Vehicle Will Not Startt

    2. If the engine still will not start, it needs work, your key may be broken. Have the adjustment or repair. Call a Toyota key checked at your Toyota dealer. If 3. If the light is out, dim or goes out dealer or qualified repair shop.
  • Page 285 If the engine still will not start, it needs which is poisonous and corrosive. adjustment or repair. Call a Toyota dealer Wear protective safety glasses when or qualified repair shop for assistance. jump starting, and avoid spilling acid on your skin, clothing, or ve- hicle.
  • Page 286 JUMP STARTING PROCEDURE 1. If the booster battery is installed in Discharged battery Jumper cable another vehicle, make sure the vehicles are not touching. Turn off all unneces- sary lights and accessories. Booster When boosting, use the battery of battery matching or higher quality.
  • Page 287 If the cause of your battery discharging is not apparent (for example, lights left on), When making connections, you should have it checked at your Toyota avoid serious injury, do not lean over dealer. the battery or accidentally let the jumper cables or clamps touch any- thing except the correct battery termi- nals or the ground.

  • Page 288: If Your Engine Stalls While Driving

    CAUTION After arriving at a safe place, stop the vehicle and call a Toyota dealer for 2. If coolant or steam is boiling out of the If the engine is not running, the pow- assistance.

  • Page 289: If You Have A Flat Tire

    You should have it checked as 4. If the engine drive belt is broken or the soon as possible at your Toyota dealer. 5. Read the following instructions coolant is leaking, stop the engine im- mediately.
  • Page 290 NOTICE CAUTION D Make sure to set the jack prop- erly in the jack point. Raising z Do not continue driving with When jacking, be sure to observe the vehicle with jack improper- a deflated tire. Driving even a the following to reduce the possi- ly positioned will damage the short distance can damage a bility of personal injury:...
  • Page 291 —Required tools and spare tire 1. Get the required tools and spare Turn the jack joint by hand. To remove the spare tire under the tire. luggage compartment: To remove: Turn the joint in direction 1 Tool bag 1 until the jack is free. 1.
  • Page 292 When connecting a jack handle exten- 2. Remove the access hole cover on 3. Insert the jack handle end into the sion with a jack handle end, use a the rear bumper with a flathead lowering screw through the access jack handle to tighten the bolts on the screwdriver.
  • Page 293 —Blocking the wheel 4. After the tire is lowered completely When storing the spare tire, put it in 2. Block the wheel diagonally op- to the ground, remove the holding place with the outer side of the wheel posite the flat tire to keep the bracket as shown in the illustration.
  • Page 294 —Removing wheel ornament —Loosening wheel nuts CAUTION Never use oil or grease on the bolts or nuts. The nuts may loos- en and the wheels may fall off, which could cause a serious ac- cident. 3. Remove the wheel ornament. 4.
  • Page 295 —Positioning the jack JACK POINTS: Front—Under the frame side rail Left rear—Under the rear axle housing Right rear—Under the bracket on the rear axle housing Make sure the jack is positioned on a level and solid place. Put a jack handle, jack handle exten- sions, and jack handle end together as shown in the illustration.
  • Page 296 —Raising your vehicle NOTICE Tighten all the joints securely. Otherwise, the extension may come off and it may damage the paint or vehicle body. When connecting a jack handle exten- 6. After making sure no one is in sion with another extension and a jack the vehicle, raise it high enough handle end, use a jack handle to tight- so that the spare tire can be...
  • Page 297 —Changing wheels To raise the vehicle, insert the jack handle end into the joint of the jack (it is a loose fit) and turn it clockwise with the handle, making sure the han- dle remains firmly fitted onto the jack handle extension.
  • Page 298 —Reinstalling wheel nuts —Lowering your vehicle CAUTION Never use oil or grease on the bolts or nuts. Doing so may lead to overtightening the nuts and damaging the bolts. The nuts may loosen and the wheels may fall off, which could cause a seri- ous accident.
  • Page 299 —Reinstalling wheel ornament —After changing wheels Tighten each nut a little at a time in 11. Check the air pressure of the re- the order shown. Repeat the process placed tire. until all the nuts are tight. Adjust the air pressure to the specifi- cation designated on page 344.

  • Page 300: If Your Vehicle Becomes Stuck

    If your vehicle becomes stuck If your vehicle becomes stuck in snow, NOTICE CAUTION mud, sand, etc., then you may attempt to rock the vehicle free by moving it forward If you rock your vehicle, observe the Before driving, make sure all the and backward.

  • Page 301: If Your Vehicle Needs To Be Towed

    If towing is necessary, we recommend CAUTION (a) Towing with wheel lift type truck— you have it done by your Toyota dealer or a commercial tow truck service. In —From front Vehicles with active height control consultation with them, have your ve- suspension system: When your ve- hicle towed using either (a) or (b).
  • Page 302 (c) Towing with sling type truck If towing is necessary, we recommend z Do not use front and rear eyelets. you to have it done by your Toyota It is not designed for towing. NOTICE dealer or a commercial tow truck ser- z Use only a cable or chain specifi- vice.
  • Page 303 If the towing vehicle can hardly move, do not forcibly continue the towing. Contact your Toyota dealer or a commercial tow truck service for assistance. Tow the vehicle as straight ahead as possible.

  • Page 304: If You Cannot Shift Automatic Transmission Selector Lever

    6. Start the engine. For your safety, 2. Pry up the cover with a flathead keep the brake pedal depressed. screwdriver or equivalent. Be sure to have the system checked by your Toyota dealer as soon as possible.

  • Page 305: If You Lose Your Keys

    Toyota dealer if you can give them the key number and master key. Even if you lose only one key, contact your Toyota dealer to make a new key. If you lose all your master keys, you cannot make new keys; the whole engine immobi- lizer system must be replaced.
  • Page 307 ..... . . Washing and waxing your Toyota ......
  • Page 308 Now, it is up to be dry. to see all the mud and dirt. It will do you. Proper care of your Toyota can help more harm than good to simply wet the High ambient temperatures can cause ensure long- term corrosion prevention.
  • Page 309 If any organic sub- the shields if they are recommended for Hand- washing your Toyota stances splash an ornament, be sure to your area. Work in the shade and wait until the...

  • Page 310: Is Recommended

    Be sure to polish and wax ing your Toyota through an automatic the chrome trim as well as the paint. NOTICE car wash. Windshield washer nozzles: Make sure...
  • Page 311 Cleaning the interior 3. Wax the vehicle again when water Vinyl interior CAUTION does not bead but remains on the sur- The vinyl upholstery may be easily face in large patches. cleaned with a mild soap or detergent Vehicles with side airbags and cur- and water.
  • Page 312 Carpets NOTICE NOTICE Use a good foam- type shampoo to z Do not use dye or bleach on the z Do not use organic substances (sol- clean the carpets. belts—it may weaken them. vents, kerosene, alcohol, gasoline, Begin by vacuuming thoroughly to remove etc.) or alkaline or acidic solutions.
  • Page 313 If you have any questions about the leather these could cleaning of your Toyota, your local cause discoloring. Toyota dealer will be pleased to answer them. z Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather.
  • Page 315 SECTION VEHICLE MAINTENANCE AND CARE Maintenance requirementss ....... . . General maintenance .

  • Page 316: Maintenance Requirementss

    See “Owner’s War- form them are presented in Section 7. or if you prefer, your Toyota dealer will be ranty Information Booklet” or “Owner’s pleased to do them at a nominal cost.

  • Page 317: General Maintenance

    Radiator, condenser and hoses Supplement” for the details. vehicle to your Toyota dealer or a quali- Check that the front of the radiator and fied service shop immediately. It is recom- condenser are clean and not blocked with mended that any problem you notice be leaves, dirt, or insects.
  • Page 318 Exhaust system Seats Parking brake If you notice any change in the sound of Check that all front seat controls such as Check that the lever has the proper travel the exhaust or smell exhaust fumes, have seat adjusters, seatback recliner, etc. op- and that, on a safe incline, your vehicle the cause located and corrected immedi- erate smoothly and that all latches lock...

  • Page 319: Does Your Vehicle Need Repairing

    If you notice any of these clues, take your tant clues are as follows: month. See page 320 for additional vehicle to your Toyota dealer as soon as information. Engine missing, stumbling, or pinging possible. It probably needs adjustment or repair.

  • Page 320: Emissions Inspection And Maintenance (I/M) Programs

    Toyota dealer comes on. In this case, your vehicle may to prepare the vehicle for re- testing. not pass the I/M test and need to be repaired.
  • Page 321 SECTION DO- IT- YOURSELF MAINTENANCE Introduction Engine compartment overview ....... Fuse locations .

  • Page 322: Engine Compartment Overview

    Engine compartment overview 1. Suspension fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Fuse block 5. Battery 6. Windshield and rear window washer fluid tank 7. Engine oil level dipstick 8. Condenser 71C004f 9. Radiator 10. Engine coolant reservoir 11.

  • Page 323: Fuse Locations

    Fuse locations Spare fuses i71002d Spare fuses 71C510a...

  • Page 324: Do- It- Yourself Service Precautions

    Right after driving, engine warranty coverage. Read separate automatically start to run if the air compartment—the engine, radiator, Toyota Warranty statement for details and conditioning is on. exhaust manifold, power steering suggestions. Use eye protection whenever you fluid reservoir spark...

  • Page 325: Parts And Tools

    Remember all Toyota parts are de- trode. Do not dispose of used oil and fil- signed in metric sizes, so your tools must...
  • Page 326 Tools: CHECKING AND REPLACING FUSES Funnel (only for adding coolant) Parts (if replacement is necessary): CHECKING BRAKE FLUID Fuse with same amperage rating as original Parts (if level is low): ADDING WASHER FLUID SAE J1703 or FMVSS No.116 DOT 3 brake fluid Parts: Tools:...

  • Page 327: Engine Oil

    SECTION DO- IT- YOURSELF MAINTENANCE Engine and Chassis Checking the engine oil level ....... . . Checking the engine coolant level .

  • Page 328: Checking The Engine Oil Level

    Checking the engine oil level NOTICE Low level Full level Be careful not to drop engine oil on the vehicle components. If the oil level is below or only slightly above the low level, add engine oil of the same type as already in the engine. Remove the oil filler cap and add engine oil in small quantities at a time, checking Add oil...

  • Page 329: Engine Oil

    ENGINE OIL SELECTION SAE 5W- 30 is the best choice for good fuel economy, and good starting in cold “Toyota Genuine Motor Oil” is used in weather. your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent If SAE 5W- 30 oil is not available, SAE to satisfy the following grade and viscos- 10W- 30 oil may be used.

  • Page 330: Checking The Engine Coolant Level

    Mark is displayed on the front of cock and water pump. Toyota engines. the container. If you can find no leak, have your Toyota Please contact your Toyota dealer for fur- dealer test the cap pressure and check ther details about “Toyota Genuine Motor for leaks in the cooling system.

  • Page 331: Checking The Radiator And Condenser

    If any of the above parts are extremely dirty or you are not sure of their condi- Use of improper coolants may damage tion, take your vehicle to a Toyota dealer. your engine cooling system. Only use “Toyota Super Long Life Coolant”...

  • Page 332: Checking Suspension Fluid Ahc

    If the reservoir needs frequent refueling, it may indicate a serious mechanical prob- 3. Make sure the fluid level is between lem. “MAX” and “MIN”. If the fluid level is lower than “MIN”, have suspension fluid AHC filled by your Toyota dealer.

  • Page 333: Checking Power Steering Fluid

    Checking power steering fluid If the level is low, add SAE J1703 or NOTICE FMVSS No. 116 DOT 3 brake fluid to the brake reservoir. If you spill some of the fluid, be sure If cold If hot to wipe it off to prevent it from dam- O.K.

  • Page 334: Checking Tire Inflation Pressure

    Checking tire inflation pres- sure Clean all dirt from outside of the reservoir CAUTION tank and look at the fluid level. If the fluid is cold, the level should be in the “COLD” The reservoir tank may be hot so be range.
  • Page 335 Keep your tire inflation pressures D Always use a tire inflation pres- Tire inflation at the proper level. sure gauge. The appearance of pressure gauge a tire can be misleading. Besides, The recommended cold tire inflation tire inflation pressures that are pressures, tire sizes and the com- even just a few pounds off can de- bined weight of occupants and cargo...
  • Page 336 D A greater possibility of tire waste fuel, reduce the comfort of driv- damage from road hazards ing, reduce tire life and make your ve- hicle less safe to drive. If a tire frequently needs refilling, have it checked by your Toyota deal-...

  • Page 337: Checking And Replacing Tires

    Checking and replacing tires The tires on your Toyota have built- in If air loss occurs while driving, do not Tread wear indicator tread wear indicators to help you continue driving. Driving even a short know when the tires need replace- distance can damage a tire beyond ment.
  • Page 338 Using any other size or type of tire Toyota recommends all four tires, CAUTION may seriously affect handling, ride, or at least both front or rear tires speedometer/odometer calibration, be replaced as a set. Observe the following instruc- ground clearance, and clearance be- See “If you have a flat tire”...

  • Page 339: Rotating Tires

    To equalize tire wear and help ex- Do not use tires other than those men- tend tire life, Toyota recommends tioned above. Do not install studded tires that you rotate your tires accord- without first checking local regulations for ing to the maintenance schedule.
  • Page 340 SNOW TIRE INSTALLATION CAUTION Side chain Snow tires should be installed on all wheels. Observe following instructions. Installing snow tires on the rear wheels Otherwise, an accident may occur re- only can lead to an excessive difference sulting in death or serious injuries. in road grip capability between the front Do not use snow tires other than and rear tires which could cause loss of...

  • Page 341: Replacing Wheels

    When installing chains on your tires, care- Correct replacement wheels are available When driving with chains installed, fully follow the instructions of the chain at your Toyota dealer. be sure to drive carefully. Slow manufacturer. down before...

  • Page 342: Aluminum Wheel Precautions

    Otherwise, an accident may occur re- sulting in death or serious injuries. When balancing your wheels, use only Toyota balance weights or equivalent Do not use wheels other than the and a plastic or rubber hammer. manufacturer’s recommended size,...
  • Page 343 SECTION DO-IT-YOURSELF MAINTENANCE Electrical components Checking battery condition ........Battery recharging precautions .

  • Page 344: Checking Battery Condition

    Checking battery condition— —Precautions —Checking battery exterior CAUTION If electrolyte gets on your skin, Ground cable Terminals thoroughly wash the contact area. If BATTERY PRECAUTIONS you feel pain or burning, get medi- cal attention immediately. The battery produces flammable and explosive hydrogen gas.

  • Page 345: Battery Recharging Precautions

    To return the moon roof to normal, Have battery Dark White see “Electric moon roof” on page 31. checked by your NOTICE Toyota dealer. Never recharge the battery while the Clear or Have battery engine is running. Also, be sure all light checked by your accessories are turned off.

  • Page 346: Checking And Replacing Fuses

    Checking and replacing fuses Type A fuses can be pulled out by the pull- out tool. The location of the pull- out tool is shown in the illustration. Type A If you are not sure whether the fuse has blown, try replacing the suspected fuse with one that you know is good.

  • Page 347: Adding Washer Fluid

    Add washer gain access to the bulbs. When replacing tem. Have your Toyota dealer correct it as fluid. a bulb, make sure the ignition switch and soon as possible.
  • Page 348 License plate lights — inside of the lens, or if there is water pooled inside light, contact your Interior lights — Toyota dealer. Personal lights Type A — Bulb Light bulbs Type Type B — 1. Open the hood. Glove box light —...
  • Page 349 Install the bulb base by turning it front of the vehicle. counterclockwise to the front of the vehicle. Left- hand haedlight: Remove washer inlet. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
  • Page 350 If the connector is tight, wiggle it. Aiming is not necessary after replacing the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer.
  • Page 351 If either the left or right front turn sig- nal and front side marker light burns out, contact your Toyota dealer. NOTICE Do not try to replace the front turn signal and front side marker light bulbs by your self.
  • Page 352 —License plate lights...
  • Page 353 SECTION SPECIFICATIONS Dimensions and weightss ........Engine .

  • Page 354: Dimensions And Weightss

    Dimensions and weights Engine Fuel Overall length mm (in.) 4890 (192.5) Model: Fuel type: 4.7L V8 (2UZ- FE) Unleaded gasoline, Octane Rating 87 Overall width mm (in.) 1940 (76.4) (Research Octane Number 91) or higher. Type: ∗ 1 Overall height mm (in.) 1875 (73.8) For improved vehicle performance, the...

  • Page 355: Service Specifications

    Coolant type: DENSO SK20R11 “Toyota Super Long Life Coolant” is used IFR6A11 in your Toyota vehicle at factory fill. In Spark plug gap, mm (in.): order to avoid technical problems, only use 1.1 (0.043) “Toyota Super Long Life Coolant” or similar...
  • Page 356 Hypoid gear oil API GL- 5 changing automatic transmission base chassis grease, NLGI No.2 fluid, use only “Toyota Genuine ATF Recommended oil viscosity: WS” (ATF JWS3324 or NWS9638) to aid Above –18_C (0_F) in assuring maximum transmission per- SAE 90 formance.
  • Page 357 BRAKES Minimum pedal clearance when depressed with the force of 490 N (50 kgf, 110 lbf) with the engine running, mm (in.): 116 (4.6) Pedal free play, mm (in.): 1 – 6 (0.04 – 0.24) Pad wear limit, mm (in.): 1.0 (0.04) Lining wear limit, mm (in.): 1.0 (0.04)

  • Page 358: Tires

    Tires Tire size and inflation pressure: kPa (psi) Front Rear Tire size Tire size Wheel size Wheel size Normal driving Trailer towing Normal driving Trailer towing P275/60R18 111H 200 (29) 220 (32) 220 (32) 240 (35) Wheel nut torque, N·m (kgf·m, ft·lbf): 131 (13.4, 96.6) NOTE: For a complete information on tires (e.g.

  • Page 359: Fuses

    Fuses Engine compartment Left side kick panel Right side kick panel Fuses 8. HAZ- TRN 15 A: 18. BAT 30 A: Emergency flashers, All components in “ECU- B2” Turn signal lights 1. ABS NO.2 40 A: Anti- lock brake sys- 19.
  • Page 360 34. AHC- B 15 A: Active height control sus- 52. DIFF 20 A: Four- wheel drive system pension (AHC) 53. WASHER 15 A: Windshield washer 35. FUEL HTR 20 A: Fuel heater 54. RADIO 10 A: Audio system 36. POWER HTR 7.5 A: Power heater 55.
  • Page 361 70. RR A/C 30 A: Rear air conditioning system 71. RH SEAT 30 A: Power seat system 72. AIR PUMP 50A: Multiport fuel injection system/Sequential multiport fuel injec- tion system 73. A/F HTR 15A: Multiport fuel injection system/Sequential multiport fuel injec- tion system...
  • Page 363 SECTION REPORTING SAFETY DEFECTS FOR U.S. OWNERS AND UNIFORM TIRE QUALITY GRADING Reporting safety defects for U.S. ownerss ....
  • Page 364 However, NHTSA cannot become involved in individual prob- lems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc.

Table of Contents

Save PDF