Toyota Tacoma 2006 Operating Manual page 130

06 04.25
LS13086
Canada only
Type B
130
CHILD RESTRAINT SYSTEM
INSTALLATION
1. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages near the button on the
seatback.
2. Type A—Latch the hooks of lower
straps onto the anchorages
tighten the lower straps.
Type B—Latch the buckles onto the
anchorages.
For owners in Canada—The symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 120 in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
2006 TACOMA from Jan.'06 Prod. (OM35871U)
CAUTION
"
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
the seat belt is not caught.
"
Push and pull the child restraint
and
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
"
After securing the child restraint
system, never recline the seat.
"
Do not install a child restraint sys-
tem on the rear seat if it interferes
with the lock mechanism of the
front seats. Otherwise, the child or
front seat occupant(s) may be killed
or seriously injured in case of sud-
den braking or a collision.