Toyota Tacoma 2006 Operating Manual page 120

06 04.25
LS13077a
3. Latch the hook onto the rear lower
anchor bracket and tighten the top
strap.
Store the removed covers in a safe place
such as the glove box.
Be sure to replace the covers when the
anchor bracket is not in use.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
120
—Using a top strap
(double cab models)
LS13051
Follow the procedure below for a child
restraint system that requires the use
of a top strap.
2006 TACOMA from Jan.'06 Prod. (OM35871U)
Symbol
mark
LS13054a
Anchor
brackets
Use the anchor bracket on the back panel
to attach the top strap.
Anchor brackets are installed for each
rear seating position.
This symbol indicates the locations of the
anchor brackets.