Toyota Tacoma 2006 Operating Manual page 118

06 04.25
LS13072
Symbol mark
TO USE THE ANCHOR BRACKET:
Front position—
1. Remove the passenger head
straint.
Lightly push down on the top sur-
face of the anchor bracket cover
with the symbol mark shown in the
illustration, then pull it forward to
remove.
118
LS13073
2. Fix the child restraint system with
the seat belt.
Latch the hook onto
re-
bracket on the back panel and tight-
en the top strap.
For instructions on installing the child re-
straint system, see "Child restraint" on
page 90 in this Section.
CAUTION
Make sure the top strap is securely
latched, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
the anchor
2006 TACOMA from Jan.'06 Prod. (OM35871U)