Emergency Stop; Programming The Memory - Volvo XC90 2004 Owner's Manual

2004 VOLVO XC90

Emergency stop

If the seat accidentally begins to move, press one of the buttons to stop the seat.
pg. 57 Interior
WARNING!
- Because the driver's seat can be adjusted with the ignition off, children should never be left
unattended in the vehicle.
- Movement of the seat can be STOPPED at any time by pressing any button on the power seat
control panel.
- Do not adjust the seat while driving.
- The seat should be adjusted so that the brake pedal can be depressed fully. In addition, position the
seat as far rearward as comfort and control allow.
- The seat rails on the floor must not be obstructed in any way when the seat is in motion.

Programming the memory

Please note that only the driver's seat is equipped with the memory function.
Three seat positions can be programmed. To program a seat position:
1. Adjust the seat to the desired position.
2. Hold down the MEM button.
3. While holding down the MEM button, press button 1 to program the current position of the seat.
Buttons 2 and 3 can be programmed in the same way.
To move the seat to a programmed position, press and hold down button 1, 2 or 3 until the seat moves to
the preset position and stops.
As a safety precaution, the seat will stop automatically if the button is released before the seat has
reached the programmed position.
file:///K|/ownersdocs/2004/2004_XC90/04xc90_04a.htm (5 of 11)12/30/2006 4:35:19 PM