Detachable Trailer Hitch - Installing/Removing; Installing The Ball Holder; Removing The Ball Holder - Volvo XC90 2004 Owner's Manual

2004 VOLVO XC90
Leveling
If your vehicle is equipped with automatic levelling, the rear suspension always retains the correct ride
height regardless of the load. When the vehicle is stationary, the rear suspension lowers, which is
normal.
pg. 103 Starting and driving

Detachable trailer hitch - installing/removing

Installing the ball holder

1. If necessary, remove the cotter pin from the locking bolt and slide the locking bolt out of the hitch
assembly.
2. Slide the ball holder into the hitch assembly.
3. Align the hole in the ball holder with the one in the hitch assembly.
4. Slide the locking bolt through the hitch assembly/ball holder.
5. Insert the cotter pin in the hole at the end of the locking bolt.

Removing the ball holder

1. Remove the cotter pin from the locking bolt and slide the locking bolt out of the ball holder/hitch
assembly.
2. Pull the ball holder out of the hitch assembly.
NOTE: A cover for the hitch assembly can be purchased from your Volvo retailer.
file:///K|/ownersdocs/2004/2004_XC90/04xc90_06b.htm (13 of 17)12/30/2006 4:35:23 PM
A-ball holder, B-locking bolt, C-cotter pin,
D-hitch assembly