Chauvet Mini Legend Wash DMX-427W User Manual page 9

.
Show Mode
Press the MENU button until
the display will blink. Use the DOWN and UP buttons to select
(show 2) mode. Once the mode has been selected, press the ENTER button to setup or the
unit will automatically return to the main functions without any change after 8 seconds. To go
back to the functions without any change press the MENU button again.
Show 1 mode- Fixture is placed on the floor. Tilt movement angle 210°.
Show 2 mode-Fixture is fixed under ceiling. Tilt movement angle 90°.
Slave Mode
Press the MENU button until
the display will blink. Use the DOWN and UP buttons to select
(2 light show) mode. Once the mode has been selected, press the ENTER button to setup or
the unit will automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
Pan Inversion
Press the MENU button until
the display will blink. Use the DOWN and UP buttons to select
(pan inversion) mode. Once the mode has been selected, press the ENTER button to setup or
the unit will automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
Tilt Inversion
Press the MENU button until
the display will blink. Use the DOWN and UP buttons to select the
(tilt inversion) mode. Once the mode has been selected, press the ENTER button to setup or
the unit will automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
is shown on the display. Press the ENTER button and
(show 1) or
is shown on the display. Press the ENTER button and
(normal) or
is shown on the display. Press the ENTER button and
(normal) or
is shown on the display. Press the ENTER button and
(normal) or
.
Display Inversion
This function allows you to read the display whether you install the unit on the floor or under
ceiling. Press the MENU button until
to change to the mode (display inversion), It will automatically store after 8 seconds.
Or press the ENTER button again return to the mode
the functions press the MENU button.
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Self-Test
Press the MENU button until
the unit will run the built-in self-test program. To go back to the functions, press the MENU
button again.
8-
Fixture Hours
Press the MENU button until
the display will show the number of working hours of the unit. To go back to the functions press
the MENU button again.
Reset
Press the MENU button until
all channels of the unit will return to their standard position. To go back to the functions press
the MENU button again.
is blinking on the display. Use the ENTER button
(display normal). To go back to
is blinking on the display. Press the ENTER button and
is blinking on the display. Press the ENTER button and
is blinking on the display. Press the ENTER button and