Table of Contents
Advertisement
5.4. DMX512 Configuration
3. Lamp
When replacing the lamp or performing maintenance, do not open the
fixture after switching off for 15 minutes until the unit cools down.
Lamp: ELC 24V 250W
1. Always switch off the main power
and never handle the lamp or
luminaries when is hot.
2. Do not touch the bulb with bare
hands. If this happens, clean the
lamp with denatured alcohol and
wipe it with a lint free cloth before
installation.
3. Never operate the lamp without
appropriate shielding.
5-
4. Make sure the lamp is located in the center for the best spot.
Diagram for Lamp changing
Advertisement
Table of Contents
