Graco 1095 Premium Hi-Boy Instruction Manual page 35

f. Place u-bolt on pump door protrusion.
ti6375a
8. Ratchet pump door forward.
ti6377a
9. Open pump door.
10. Pull out pump pin and place in pin holder.
ti7327a
3A0157A
Displacement Pump Replacement 1095/1595/Mark V
Installation
1. Adjust piston rod with pin holder to pull out piston
rod. Tap piston rod on hard surface to push in piston
rod.
2. Push pump collar flush with bearing housing ledge
to be able to close pump door.
ti5492a
3. Slide pump into connecting rod. Push pump pin until
it is fully retained.
NOTE: Pin will snap into position.
ti7328a
ti6325a
ti6378a
35