Models ZR2240w, ZR2440w, and ZR2740w use the HP Quick Release 2 mechanism for easy moving
of the monitor. To mount the panel onto the pedestal:
1.
Slide the mounting plate on the pedestal under the upper lip of the recess in the back of the panel.
2.
Lower the pedestal into the recess until it snaps into place.
3.
The HP Quick Release 2 latch pops up when the monitor is locked in place.
Figure 3-2
Rear Components
ZR2040w Model
Figure 3-3
Component
1
AC Power Connector
2
Cable Lock Provision
3
DisplayPort Connector
ENWW
Mounting the Panel onto the HP Quick Release 2
ZR2040w Rear Components
Function
Connects the AC power cord to the monitor.
Provides slot for use with cable security locks.
Connects the DisplayPort cable to the monitor.
Rear Components
7