HP ZR2040w User Manual page 34

through the OSD. Pressing the
source-control submenu.
Figure 4-1
Control
1
2
3
4
5
6
26 Chapter 4 Operating the Monitor
+ button on the front of the monitor will take you directly to the OSD
ZR2040w and ZR2240w Front Panel Controls
Menu
Minus
Plus/source
OK/auto
Power
Power LED
Function
Opens, selects or exits the OSD menu.
If the OSD menu is on, press to navigate backward through
the OSD menu and decrease adjustment levels.
If the OSD menu is inactive, resets OSD choices to their
factory defaults, ZR2040w model only.
If the OSD menu is on, press to navigate forward through
the OSD menu and increase adjustment levels.
If the OSD menu is inactive, press to activate the source
button that chooses the video signal input.
If the OSD menu is on, press to select the highlighted menu
item.
If the OSD menu is inactive, press to activate the auto
adjustment feature to optimize the screen image.
Puts the monitor into low-power mode.
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
Off indicates power off, or normal operation if the LED is
suppressed.
ENWW