HP ZR2040w User Manual page 42

Table 4-1
Icon
34 Chapter 4 Operating the Monitor
OSD Menu (continued)
Main Menu
Exit
Submenu Description
Default Source Selects the default or primary video input signal when
the monitor is connected to two active and valid video
sources. The monitor will automatically determine the
video format. The choices are:
●
●
●
●
The factory default is the first active input when
examined in this order: DisplayPort, DVI-D, HDMI,
VGA.
Auto-Switch Source Lets you prevent the monitor from automatically
switching to another active input when the current
input becomes inactive. If you set Auto-Switch Source
to Off, the monitor will go dark rather than scan for
another active input.
Source Detection This option is displayed in the OSD when a
DisplayPort input is selected. You can set Source
Detection to:
●
●
The factory default is Low Power.
Exits the OSD menu screen.
DisplayPort
DVI-D
HDMI
VGA
Always Active
Low Power
ENWW