Table of Contents
Advertisement
Rear and side components
To identify the components on the rear of the monitor, use this illustration and table.
Table 2-2
Rear and side components and their descriptions
Component
(1)
Joypad
(2)
Security cable slot
(3)
Power connector
(4)
HDMI port
(5)
DisplayPort connector
(6)
USB Type-C port (upstream)
(7)
DisplayPort OUT connector
(8)
RJ-45 (network) jack
(9)
USB Type-A port
(10)
USB Type-C port
(downstream)
6
Description
Press to open the OSD settings..
Connects an optional security cable.
Connects a power cord.
Connects the HDMI cable to a source device such as a computer.
Connects a DisplayPort cable to a source device such as a computer.
Connects a USB Type-C cable to a source device, such as a computer. This USB
Type-C port can function as a DisplayPort audio/video input or as a USB 3.0
connection. The USB Type-C port offers the fastest transfer rate, and the alternate
mode with DP1.2 supports the maximum resolution of 1920 x 1080 at 75Hz, and
2560 x 1440 at 75Hz. It can also be used to deliver up to 65 W of power to a device.
Power delivery outputs are 20V/3.25A, 15V/4.33A, 12V/5A, 9V/3A, 5V/3A to
achieve a 65 W output.
Connecting a USB Type-C cable from a source device to this port on the monitor
enables USB ports on the monitor.
Connects a DisplayPort cable to a secondary monitor for multi-streaming.
Network (RJ-45) data rate via USB Type-C max speed is 1000 Mbps
- Green (right): The network is connected.
- Amber (left): Activity is occurring on the network.
NOTE:
Supports Wake on Lan (WOL) In-band, Mac Address Pass through (MAPT) in-
band (HP models only), and PXE boot. The functionality may vary with PC settings.
NOTE:
This network port is fully energy efficient according to IEEE standards (IEEE
802.3az-2010) as long as all connected devices support this feature.
Connects a USB cable to a peripheral device, such as a keyboard, mouse, or USB
hard drive.
Connects a USB Type-C cable to a peripheral USB device, provides data transfer,
even when the monitor is in Sleep mode or DC off with OSD Performance mode
on. This port charges most devices (15 W), such as a smart phone or a tablet.
NOTE: Cables or adapters may be required (purchased separately).
Advertisement
Table of Contents
