Harman Stove Company Conquest Installation & Operating Manual page 4

The Harman Conquest Direct Vent Gas Stove is a
listed gas-fired direct vent room fireplace tested by
Intertek Testing Services/Warnock Hersey to ANSI
Z.88-00-CSA .33-00 and CANL/CGA-
.7-M9.
The installation of the Conquest Direct Vent
Gas Stove must conform with local codes, or in the
absence of local codes, with National Fuel Gas Code,
ANSI Z3. — latest edition and CAN  B-49.
and . Installation Code.
Also for use in mobile (manufactured) homes
after home is sited.
Mobile (manufactured) home installations must
adhere to Title 4 CFR, Part 380, or CSA Z40.4.
CAUTION: This appliance must be vented to
the outside.
Installation and repair of the Conquest Direct
Vent Gas Stove should be done by a qualified service
person. The appliance should be inspected before
use and at least annually by a qualified service per-
son. More frequent cleaning may be required due to
excessive lint from carpeting, bedding material, etc.
It is imperative that control compartments, burners,
and circulating air passageways of the Conquest be
kept clean.
Due to high temperatures, the Conquest Direct
vent Gas Stove should be located out of traffic
and away from furniture and draperies.
Children and adults should be alerted to the
hazards of high surface temperatures and
should stay away to avoid burns or clothing
ignition.
Young children should be carefully supervised
when they are in the same room as the
appliance.
Clothing or other flammable materials should
not be placed on or near the appliance.
Surveiller les enfants. Garder les vetements, les
meubles, lessence ou autres liquides a vapeur
inflammables lin de lappareil.
Introduction
When operating your Harman Conquest Gas
Stove, respect basic safety standards. Read these
instructions carefully before you attempt to operate
the stove. Failure to do so may result in damage to
property or personal injury and may void the product
warranty.
Consult with your local building code agency
and insurance representative before you begin your
installation to ensure compliance with local codes,
including the need for permits and follow-up inspec-
tions.
Several issues must be addressed when selecting
a suitable location for your Conquest Gas Stove. Ob-
serving required clearances to combustible materials,
the proximity to a safe chimney or venting system
location, and the accessibility of the gas and electrical
supply must all be considered. In addition, selecting a
location that takes advantage of the building's natural
air flow is also desirable to maximize the heating
effectiveness of the stove. In many cases, this is a
central location within the building.
Any safety screen or guard removed for
servicing an appliance must be replaced prior
to operating the appliance.
This appliance may be installed in an af-
termarket permanently located (mobile) home,
where not prohibited by local codes.
This appliance is only for use with the
type(s) of gas indicated on the rating plate. This
appliance is not convertible for use with other
gases, unless a certified kit is used.
Cet appareil peut etre installe dans un maison
prefabriquee (mobile) deja installee a demeure si
les reglements locaux le permettent.
Cet appareil doit etre utilise uniquement
avec les types de gas indiques sur la plaque sig-
naletique. Ne pas l utiliser avec d autres gas sauf
si un kitde conversion dertifie est installe.