Harman Stove Company Conquest Installation & Operating Manual page 26

Gas stove

Hide thumbs Also See for Conquest:

Table of Contents

Allen Set

Screws

INSTALLATION - Options

Round Tile Not

Used On Top Vent

Trim Ring Not

Used On Rear

Vent.

Tile Kit

Each tile kit contains six tiles and fifteen allen-

set screws. If the Conquest is installed as a top vent,

then the round tile is not used. If it is installed as a

rear vent, then the trim ring is not used.

Installing Tiles

Below each tile opening are three threaded

holes. In some cases it may be helpful to remove

extra paint from the treads with a /4-0 tap.

. Screw the set screws down until the top of the

screw is about the thickness of the tile below the

top surface.

. Place the proper tile in the opening.

3. Observe the level of the tile. If the level of the

tile is not satisfactory, remove the tile by press-

ing down on one of the corners and adjust set

screws accordingly.

Only For Qualified Installers

Table of Contents