Displaying Version Information - Avocent AutoView 2000 Installer/User Manual

28
AutoView 2000 Installer/User Guide
-or-
If your console is password protected, see the previous procedure, then go
to step 2.
2. Select Enable Screen Saver.
3. Type the number of minutes for Inactivity Time (from 1–99) to delay
activation of the screen saver.
4. Choose Energy if your monitor is E
select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not
compliant with E S
NERGY TAR
5. (Optional) Click Test to activate the screen saver test which lasts 10
seconds then returns you to the Security dialog box.
6. Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a server; no server is
selected. The status fl ag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears and any
previous server connection will be restored.
To turn off the screen saver:
1. In the Security dialog box, clear Enable Screen Saver.
2. Click OK.
To immediately turn on the screen saver:
Press Print Screen, then press Pause.

Displaying Version Information

OSCAR enables you to display the AutoView 2000 and AVRIQ firmware
versions. For optimum performance, keep your firmware current. For more
information, see Appendix A.
To display version information:
1. Press Print Screen. The Main dialog box will appear.
2. Click Commands - Display Versions. The Version dialog box appears. The
top half of the box lists the subsystem versions in the appliance.
NERGY
® .
®
S compliant; otherwise
TAR