Assigning Server Names - Avocent AutoView 2000 Installer/User Manual

To access the Setup menu:
1. Press Print Screen to launch OSCAR. The Main dialog box appears.
2. Click Setup. The Setup dialog box appears.
Figure 3.2: Setup Dialog Box

Assigning server names

Use the Names dialog box to identify individual servers by name rather than by
port number. The Names list is always sorted by port order. Names are stored in
the AVRIQ, so even if you move the cable/server to another ARI port, the name
and configuration will be recognized by the appliance.
NOTE: If a server is turned off, its respective AVRIQ will not appear in the Names list.
To access the Names dialog box:
1. Press Print Screen. The Main dialog box will appear.
2. Click Setup - Names. The Names dialog box appears.
Figure 3.3: Names Dialog Box
NOTE: If the server list changes, the mouse cursor will turn into an hourglass as the list is
automatically updated. No mouse or keyboard input will be accepted until the list update is complete.
Chapter 3: Basic Operations
21