Front Panel Controls - Halcro DM8 Owner's Manual

dm8

Front Panel Controls

Figure 1
1. LCD Information
Display
2. Balance Control Left
3. Standby/On button
1. LCD Information Display:
display delivers messages and system
status to assist you in operating the unit.
See page 11 for a complete breakdown on
the display.
2. Balance Control Left:
button in conjunction with Balance
Control Right (Fig 1, 5), the user can
change the relative volume for the left
and right channels.
button will increase the volume on the
left hand channel and decrease the
volume on the right.
3. Standby/On button: The HALCRO™
dm8 is designed to remain in standby
mode when not in use. This button will
toggle the unit between Standby and On.
To turn the unit off completely, use the
rear panel Master Power Switch (Fig 6, 6).
4. Mute button
5. Balance Control Right
6. Input Select Control
7. Volume Control
This
Using this
Pressing the Left
8. Phase button
9. Remote Sensor
Window
4. Mute button: Depressing this button
will Mute the output to the speakers.
5. Balance Control Right:
button in conjunction with Balance
Control Left (Fig 1, 2), the user can
change the relative volume for the left
and right channels. Pressing the Right
button will increase the volume on the
right hand channel and decrease the
volume on the left.
6. Input Select control: By turning this
knob, the preamplifier will scroll through
all the programmed input devices (CD
player, Tuner, DVD, etc.) attached to the
unit.
TM
Using this
Page 9 of 26