Mechanical Design - Halcro DM8 Owner's Manual

dm8
TM
Remote control:
When designing the HALCRO™ Remote Control, we aimed to reflect the
quality and forms of the HALCRO™ preamplifiers. Machined from a solid
aluminum extrusion, the remote rests comfortably in the hand with its
minimalist array of buttons falling within the natural sweep of the thumb.
Simple and logical to operate, every effort has been made to keep this product
free of unnecessary complexity.

MECHANICAL DESIGN

By Lance Hewitt
The HALCRO™ dm8 and dm10 can boast their spectacularly low noise and
distortion specifications while their cases contain inherently noisy digital
circuitry, including a switch-mode power supply, partly due to the
mechanical design of their circuit boards and the boxes that contain them.
Supports of folded aluminum serve not only as bases to which the electronics
are anchored, but also to shield different sections of the circuitry from one
another.
Each of the audio, panel and display, and power supply sections is contained
within its own internal aluminum enclosure. Cables connecting the separate
sections are few and short, minimizing both radiation and reception of
unwanted signals.
Please enjoy the HALCRO™ audio experience.
HALCRO™ has enjoyed creating perfect audio reproduction for the world's
music connoisseurs.
If you wish to contact HALCRO™ to supply feedback on your purchase or for
general enquiries, please feel free to contact us:
Email: admin@halcro.com
Telephone: +61 8 8238 0807
Facsimile: + 61 8 8238 0852
Page 7 of 26