Operating Instructions; Connecting Signal Sources; Home Theatre Processor Controlling Volume; Connecting The Mains Power Supply Cable - Halcro DM8 Owner's Manual

Preamplifier

Hide thumbs Also See for DM8:

Table of Contents

dm8

Operating Instructions

As a safety precaution please ensure that the unit is not connected to the mains power while

connecting signal sources.

When you originally receive your preamplifier all the inputs are de-allocated.

If you are changing your signal source units, de-allocate the input source first – follow De-

allocating Program Buttons instructions (Page 16)

Connect all signal source units (e.g. CD player) to the terminals (Fig 6, 1) at the rear of the

preamplifier, make note of which input each signal source unit is connected to.

As a safety precaution please ensure that the unit is not connected to the mains power while

connecting a Home Theatre Processor.

Connect your Home Theatre Processor to any of the programmable inputs at the rear of the

preamplifier.

Program the preamplifier to the unit using Allocating signal sources and the remote control on

page 19. We recommend you use the DVD function.

To set the preamplifier to operate with zero gain, adjust both volume channels to 0.0db. The

preamplifier will then have no effect on the volume. You will now be able to control the

volume of your system by using your Home Theatre Processor volume control.

Plug the main power cable into the dm8's mains power socket on the rear of the unit. (Fig 6, 6).

Remove the battery cover from the rear of the unit, insert the three supplied AAA batteries into

the unit (ensure that the polarity is correct). Refit the battery cover.

If the remote control will not be used for a period longer than 1 month remove the batteries.

Page 15 of 26

Table of Contents