Session Options; Start Discovery; Edit Session Name; Set Limit Frequencies (Conventional Only) - Uniden BCD436HP Owner's Manual

Conventional Discovery
Input Session Name - Enter the Name and press E/yes. See Data Naming.
Trunking Discovery
Input System Name - Enter the first few relevant letters of the system and press E/yes.
See Data Naming.
Note: The System must be enabled for scan to input system name.
Select System - Scroll to the System and press E/yes.
Select Site - Scroll to the Site and press E/yes.
Input Session Name - Enter the Name and press E/yes. See Data Naming.

sessIon optIons

Press Menu then scroll to Discovery and press E/yes.
Scroll to Trunking/Conventional Discovery and press E/yes.
Scroll to the Discovery Session and press E/yes.

start discovery

edit session name

set limit frequencies
set modulation
set step
set delay
set logging
Start Discovery
This starts the Discovery Session.
Press Menu to stop and review the Run information. See Review Discovery.
Press Avoid to Avoid a hit.
Press Func then System to exit.
Edit Session Name
This allows you to name a Session.
See Data Naming.

Set Limit Frequencies (Conventional Only)

This sets the lower and upper frequencies for conventional discovery session.
Set Lower Limit Enter the lower limit.
Set Upper Limit Enter the upper limit.

Set Modulation (Conventional Only)

This sets the modulation for conventional discovery session.
Auto, AM, FM, NFM, WFM, or FMB (FM Broadcast)

Set Step (Conventional Only)

This sets the step size for conventional discovery session.
Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz
set Compare to database
set record duration
set time-out timer
system Information
set auto store
delete session
Change system
61