Vehicle Installation; Mounting Using The Bracket - Uniden BCD436HP Owner's Manual

vehICle InstallatIon

You can mount your scanner in your vehicle, using either the supplied bracket or the optional
DIN-E sleeve.
If the scanner loses power (as when you turn off your car's ignition with the scanners power switch
on), it can corrupt the microSD card. To ensure that does not happen, turn off the scanner before
turning the car's ignition off.
WARNING! AVOID AIRBAG DEPLOYMENT ZONES.
Ignoring this installation concern may result in bodily harm and the inability of the
airbag to perform properly.

Mounting Using the Bracket

With the bracket removed from the radio, use the holes in the bracket as a template to initially
mark the location you plan to use in your vehicle. Be absolutely certain of what might be behind
the mounting surface before making any holes, be it above, or below, or in front of your dash,
armrest console, or other location. If you drill carelessly, expensive damage can result. If in doubt,
consult your vehicle dealer's service department or a qualified professional installer.
11