Search Options - Uniden BCD436HP Owner's Manual

Manual. Allows you to manually set the threshold in threshold setting mode or using the
P25 Threshold Level setting.
Default. Sets the scanner to the default threshold of 8, Auto.
P25 Threshold Level – The default setting is 8.
0 to 20
Press Menu. Scroll to Search for... and press E/yes.
Scroll to the options below and press E/yes.
IMPORTANT! There are many options and setting in Search/Close Call Options that affect
and compliment the settings for searching. Please review those first.
edIt Custom
You can edit the 10 Custom Search ranges. The default custom search range names appear as
Custom 1, Custom 2, and so on.
Custom 0-9. Select for each Custom Search.
Edit Name. See Data Naming.
Edit Srch Limit
Set Lower Limit. Enter the lower limit.
Set Upper Limit. Enter the upper limit.
Set Delay Time
-10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec.
Set Modulation
Auto, AM, NFM, FM, WFM, or FMB (Broadcast)
Set Attenuator
On or Off
Set Step
Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz
Set Audio AGC
Analog - Press E/yes to toggle On or Off.
Digital - Press E/yes to toggle On or Off.
P25 Waiting Time
0 to 1000 ms
P25 Threshold Mode
Auto, Manual, Default
P25 Threshold Level
0 to 20
Search with Scan. See also Select Lists to Monitor and Search with Scan.

searCh optIons

Custom search
edit Custom
set search Key
search with scan
65