Replay Transmissions; Record Transmissions; Main Features - Uniden BCD436HP Owner's Manual

replaY transmIssIons

Your scanner Replay feature acts as an instant replay of the transmissions you've just heard.
You can set how long a period Replay records for instant playback. This period can range from
30 seconds to 240 seconds (4 minutes). While you can replay that recording immediately and
continue replaying it, you cannot save it for future listening.

reCord transmIssIons

With your scanner, you can record transmissions. When you begin recording, your scanner adds
the Replay recording buffer to the recording. These recording sessions are saved and can be
replayed on demand. Rename and delete sessions through the Review Recordings submenu.

maIn features

No Programming Required – Factory programmed microSD card for all known radio systems
®
in the US and Canada. The database is updatable with the Sentinel software and Uniden updates
the main database weekly.
Scan by Location – Allows you to set your location(s) by zip/postal code or GPS coordinates for
instant reception. The Auto-locate feature will find local systems if you don't know where you are.
Favorites Scan – Allows you to organize your Systems into Favorites Lists. The scanner will scan
multiple Favorites Lists and Full Database at the same time.
4 GB microSD card (provided - supports up to 32 GB) – For storing Favorites Lists, Profiles, all
your settings, Discovery sessions, and recording sessions.
Location Based Scanning – Connect to a GPS receiver (not included) for precise system
selection and continuing reselection when you travel. The scanner can automatically Avoid and
Unavoid Systems and Departments based on your current location as provided by an external
GPS unit.
Range Control – Lets you set how far out from your current location the scanner will search for
channels in Favorites Lists and the database. Location precision for departments and sites that
allows you to define a location and range using rectangles instead just of a single circle.
Wi–Fi Dongle (BCD536HP Only) – With a WiFi app to connect your iPad/Android Tablet/
computer to remotely control the scanner.
Trunk Tracker V Operation – Scans APCO 25 Phase 1 and Phase 2, Motorola, EDACS, and LTR
trunked systems, as well as conventional analog and P25 digital channels.
Multi-Site Trunking – Lets you program the scanner to share trunked system IDs across multiple
sites without duplicating IDs.
Control Channel Only Scanning – With Motorola trunking frequencies, you do not have to
program voice channel frequencies.
Instant Replay – Plays back up to 240 seconds (4 minutes) of the most recent transmissions.
Audio Recording – Capture transmissions for later playback.
Custom Alerts – You can program your scanner to alert when you receive, a Channel or Unit ID,
a Close Call hit, an ID is transmitted with an Emergency Alert, or a Tone-out hit. For each alert
in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 2
flash patterns.
Multicolor LED Alert – The alert LED with 7 colors, Blue, Red, Magenta, Green, Cyan, Yellow, or
White, can be used with your Custom Alerts.
5