Basic Functions; Switching On And Off; Mode Selection; Selecting Preset Channels - Grundig DTR 1560 MICRO User Manual

14

BASIC FUNCTIONS

Switching on and off

Press » « to switch on the digital receiver from standby mode.
1
– The mode indicator lights up green.
2 Press » « to switch the digital receiver to standby mode.
– The indicator lights up red.

Mode selection

You can choose between TV and radio modes.
Press »
1
TV

Selecting preset channels

Move up and down the channels by pressing »P+« or »P-« as
1
required.
2 Enter single-digit or multi-digit preset channel numbers by
pressing »1 ...
– Channels with no stations assigned are ignored.
Note:
Every time you switch stations, the current channel number, the
name of the station, the time, the title, and the start time of the
current and following programmes are shown on the screen.
If you press and hold down »?«, you will receive detailed infor-
mation about the current programme. If you press » « you will
receive information about the next programme. By pressing
» « you return to information about the current programme.

Using the options

Some stations occasionally offer multiple camera perspectives,
audio tracks and/or teletext.
The symbol appears in the top right corner if one or more of
these options are available.
This means that there is either a picture, audio or teletext option or
that there is a combination of selection options.
F
Press » «.
1
Press »P+« or »P-« to select the option and press »OK« to
2
confirm.
Note:
It is possible that picture and audio options are available. In this
case you must press »
______________________________
« or » « to select the mode.
Radio
0« on the remote control.
F
« repeatedly to select the desired option.