Timer Functions - Grundig DTR 1560 MICRO User Manual

26
ADDITIONAL FUNCTIONS

Timer functions

You can set a connected video recorder to record a programme.
A total of 8 recording timers are available.
Programming the recording timer
1 In the main menu, select »Timer« with »P-« or »P+« and press
»OK« to confirm.
2 Press »P-« or »P+« to select the timer position (---) and press
»OK« to confirm.
Select »Station« with »P-« or »P+« and press »OK« to
3
confirm.
Press »P-« or »P+« to select the station from the list and press
4
»OK« to confirm.
Select the month with » « or » « and press »OK« to confirm.
5
6 Press » « or » « to select the day and press »OK« to
confirm.
Use »0« to »9« to enter the start and end time in four digits.
7
Press » « or » « to select the cycle and press »OK« to
8
confirm.
Press »OK« to store the timer.
9
– The timer is saved to the timer list.
– You can delete single timers by pressing »
by pressing » «.
10 Press »i« to finish the setting.
– The digital receiver switches to the selected station at the set
time.
Notes:
Your video recorder must also be programmed accordingly.
Entries by remote control are not possible during timer
recording.
You can interrupt the timer recording by pressing » « and
»OK«.
If the receiver is in standby mode before the timer starts, it
switches back to standby when the timer has finished.
_____________________________
z « and all timers