CONTENTS ____________________________________________ General information Packing contents GRUNDIG accessories for satellite receivers Digital satellite reception Special features of your digital receiver What is Common Interface? Set-up and safety Overview The front of the digital receiver The back of the digital receiver...
Page 3
CONTENTS _________________________________________________ Special settings Resetting the digital receiver to its original state Updating the digital receiver software 32-34 Information Displaying station reception properties Displaying device information Connecting the digital receiver to a PC Technical data Troubleshooting...
GRUNDIG accessories for satellite receivers. Digital satellite reception In order to use your new DSR 3410 CI digital receiver you need a digital-compatible satellite antenna, which must be installed and aligned to the required satellites (for example Astra and EutelSat/Hotbird).
GENERAL INFORMATION ______________________________ Special features of your digital receiver The DSR 3410 CI digital receiver can receive and process all unen- crypted digital satellite stations. This digital receiver has a built-in digital receiver unit for satellite stations. The receiver unit converts the signals from digital satellite stations to provide outstanding audio and picture quality.
This digital receiver is designed to receive, record and play back DSR 3410 CI DIGITAL SATELLITE RECEIVER ON/OFF RADIO video and audio signals. Any other use is expressly prohibited.
OVERVIEW ____________________________________________ The front of the digital receiver DSR 3410 CI DIGITAL SATELLITE RECEIVER ON/OFF RADIO ON/OFF Switches the digital receiver to standby mode and off again. • The digital receiver is in standby mode. (red) • Lights up in radio mode.
OVERVIEW _________________________________________________ The back of the digital receiver VIDEO OUT DIGIAL AUDIO OUT 950-2150MHz 14/18V WITHOUT LNB max 400mA 230 V 50 Hz PCMCIA SLOT 1 22kHz EURO AV 2 10 W max. INPUT SAT RS 232 PCMCIA SLOT 2 DIGIAL AUDIO OUT OPTICAL EURO AV 1 Antenna socket for the satellite antenna.
Opens the »Record timer« menu. Opens the »Subtitles« menu. Opens the »Sound« menu. AVR, TV Switches to operating a GRUNDIG AV receiver, AV receiver, GRUNDIG television or GRUNDIG DVD player. Keep the appropriate button (»AVR«, »TV«, »DVD«) pressed down. Then press the required button.
CONNECTION AND PREPARATION VIDEO OUT 950-2150MHz DIGIAL AUDIO OUT 14/18V WITHOUT LNB max 400mA 230 V 50 Hz PCMCIA SLOT 1 22kHz EURO AV 2 10 W max. INPUT SAT RS 232 DIGIAL AUDIO OUT OPTICAL PCMCIA SLOT 2 EURO AV 1 DEC.
CONNECTION AND PREPARATION _________________ Connecting an AV receiver or hi-fi system VIDEO OUT Plug a standard cinch cable into the »VIDEO OUT« and »AUDIO L R« PCMCIA SLOT 1 sockets (left/right) on the digital receiver and the corresponding input sockets on the AV receiver or hi-fi system. PCMCIA SLOT 2 Connecting a digital multi-channel amplifier Plug a standard cinch cable into the...
SETTINGS ______________________________________________ The menu This digital receiver has a very comprehensive, user-friendly menu system. The menu is displayed on the television screen. The digital receiver responds to many functions which you select on the remote control with informative menus and icons on the tele- vision screen.
SETTINGS _________________________________________________ Assigning preset stations The digital receiver is already programmed with the stations from the Astra 19.2° East, Eutelsat/Hot Bird 13° East and Turksat 1C satellites. The following settings allow you to select the menu language, the Menüsprache country where you are operating the digital receiver and the main Türkçe Deutsch satellites.
SETTINGS _________________________________________________ Editing the station list You can change the order of preset stations as required and delete stations you do not need. Preset list In the main menu, select »Preset list« with »P+« or »P-« and Sort press »OK« to confirm. Edit bookmarks Select »Sort«...
SETTINGS _________________________________________________ Editing the list of favourite stations You can change the order of preset stations as required and delete stations you do not need. You can select your favourite stations and save them in the list of favourites. Preset list Sort In the main menu, select »Preset list«...
SETTINGS _________________________________________________ Setting the local time To ensure that the TV guide always shows the current programmes at the right time, you must enter the difference between your local time and GMT (Greenwich Mean Time at longitude “0”). Installation All times given by the TV guide are then converted to your local Menu language time.
SETTINGS _________________________________________________ Adjusting the digital receiver to the television set Specifying the video signal at the Euro AV (TV) Installation output Menu language Station search You can choose between the settings »FBAS« (normal picture Video output quality), »RGB« (high picture quality) »Y/C« (S-Video signal) and Time »YUV«...
SETTINGS _________________________________________________ Selecting the television picture conversion If you have a 4:3 format television or flat screen, the following settings are available: »Pan-Scan« for wide-screen playback without black bars on the top and bottom edges of the screen. »Letterbox« for wide-screen playback with black bars on the top and bottom edges of the screen.
SETTINGS _________________________________________________ Adjusting the digital receiver to the LNB configuration of the satellite antenna The digital receiver has been factory set so that it is ready for operation, without time-consuming adjustment, with most satellite antennas and LNB configurations. Installation Changes in this menu have a direct effect on the reception charac- Menu language Station search teristics of the digital receiver and should therefore only be made by...
SETTINGS _________________________________________________ Audio settings In the main menu, select »Settings« with »P-« or »P+« and Sound press »OK« to confirm. Sound channel TV English Sound settings Stereo Select »Sound« by pressing »OK«. Volume adjustment – The »Sound« menu appears. Sound channel Dig. Same as TV Note: Further operation is explained in the following sections.
Page 21
SETTINGS _________________________________________________ Selecting the audio channel for the digital output You can choose the audio mode for the digital output (e.g. AC-3 Stereo). The choice of audio depends on the station and the current programme. Sound Select »Sound channel Dig.« by pressing »P-« or »P+« and Sound channel TV English press »OK«...
BASIC FUNCTIONS ______________________________ Switching on and off Press » « to switch on the digital receiver from standby mode. – The mode indicator lights up green (TV mode) or yellow (radio mode). Press » « to switch the digital receiver to standby mode. –...
BASIC FUNCTIONS ______________________________________ Muting the sound Press » « on the remote control to mute the sound. Press » « on the remote control to switch the sound on again. – You can hear the sound at the volume previously set. Selecting stations from lists You can select stations from various lists (e.g.
BASIC FUNCTIONS ______________________________________ TV guide The TV guide provides information on the current station such as the title and descriptions of the current and next programmes. Press »TV-G« to view the station information. – All today’s programmes are shown. TV Guide Monday 10.05.2004 9:15 - 9:30 Börse&Wirtschaft...
ADDITIONAL FUNCTIONS _________________ Setting the menu language Press »i« to open the main menu. Select »Installation« with »P-« or »P+« and press »OK« to Menu language confirm. Deutsch Language English Select »Menu language« with »P-« or »P+« and press »OK« Français to confirm.
ADDITIONAL FUNCTIONS _____________________________ Preset satellite stations This digital receiver has been programmed at the factory with most digital TV and radio stations on the Astra 19.2° East, EutelSat/ Hotbird 13° East and Turksat 1C satellites. You can see which stations have been preset by pressing »OK« to call up the TV list for TV or radio.
ADDITIONAL FUNCTIONS _____________________________ Manual station search If the station search does not find a particular station, you can look for it using the manual search. Make sure you enter all the parame- ters of the station you are looking for correctly. You can find the latest transponder information on the teletext pages of various broadcasters, in a current satellite TV magazine or on the internet.
ADDITIONAL FUNCTIONS _____________________________ Selecting the video channel Some stations (such as Pay-TV stations) provide viewers with the Settings choice of several stations or camera angles on the same preset posi- Sound tion. This menu allows you to choose between the various stations. Subtitles Video In the main menu, select »Settings«...
ADDITIONAL FUNCTIONS _____________________________ Timer functions You can set your digital receiver to switch off at a selected time or to Timer program a recording on a connected video recorder. A total of Sleep timer 10 recording timers are available. Record timer Entering the switch-off time In the main menu, select »Timer«...
Page 30
ADDITIONAL FUNCTIONS _____________________________ Programming the recording timer In the main menu, select »Timer« with »P-« or »P+« and press Record timer »OK« to confirm. Timer place (1...10) 00:00 Uhr Start at Select »Record timer« with »P-« or »P+« and press »OK« to 00:00 Uhr Stop time confirm.
SPECIAL SETTINGS ______________________________ Resetting the digital receiver to its original state This function enables you to delete the station lists and all custom settings. In the main menu, select »Installation« with »P-« or »P+« and press »OK« to confirm. Special functions Manual Software update Select »Special functions«...
9- or a 15-pin D-SUB socket, and a 9-pin D-SUB plug for connection to the receiver. You can use this connection for software updates and for uploading and downloading other data. You can find more information on the internet at www.grundig.com.
INFORMATION ___________________________________________ Technical data This product complies with the following EU directives: 73/23/EEC and 89/336/EEC. It complies with the standards required for CE labelling, EN 55013: 1990 including A12: 1994, A13: 1996, A14: 1999, EN 55020: 1994 including A11: 1996, A12, A13, A14: 1999, EN 60065: 1998, EN 61000-3-2: 1995 including A14: 2000, EN 61000-3-3: 1995.
INFORMATION ___________________________________________ Troubleshooting If a fault occurs, first refer to this information before you take the digital receiver for repair. If you are unable to rectify the fault using the information given here, contact your local dealer or service specialist. Under no circumstances should you attempt to repair the digital receiver yourself, as this will invalidate the guarantee.
Need help?
Do you have a question about the DSR 3410 CI and is the answer not in the manual?
Questions and answers