Information; Displaying Station Reception Parameters; Displaying Hard Drive Information - Grundig DSR 4530 HDD User Manual

Personal digital satellite recorder
Hide thumbs Also See for DSR 4530 HDD:
Table of Contents

Advertisement

Reception parameters
7
SAT.1
Frequency
12480 MHz
Symbol rate
27500 Ksym/s
Polarisation
Vertikal
Bit Error Rate
0
Reception
ok
S/N
13
Level
254
Select
Exit
Back
Channel
HDD Information
HDD Type
SAMSUNG SV0802E
Version
45221 p1
Total Size
76351 MB
Available
76143 MB (99%)
42 Hours 18 Minutes
Back

INFORMATION

Displaying station reception parameters

In the »Main Menu«, select »Installation« with »P-« or »P+«
1
and confirm with »OK«.
2
Select »Info« with »P-« or »P+« and press »OK« to confirm.
3
Select »Reception parameters« with »P-« or »P+« and press
»OK« to confirm.
– The »Reception parameters« menu appears.
4
In the »Reception parameters« menu switch the station with
»P-« or »P+«.
Notes:
The lower section of the menu shows the signal properties. The
lower the number of »Bit Error Rate« displayed (the optimum
value is »0«), and the further the »Level« bar extends to the
right, the better the reception signal.
The signal level not only depends on the settings of your receiv-
er unit, but also on the channel which is currently active.
Remember this when aligning your antenna using the signal
level display.
Press »i« to quit the menu.
5

Displaying hard drive information

In the »Main Menu«, select »Installation« with »P-« or »P+«
1
and confirm with »OK«.
Select »Info« with »P-« or »P+« and press »OK« to confirm.
2
Select »HDD Information« with »P+« or »P-« and press »OK«
3
to confirm.
– The »HDD Information« menu appears.
Exit
Press »i« to quit the menu.
4
_____________________________________
43

Advertisement

Table of Contents
loading

Table of Contents