Table of Contents
Advertisement
● Setting
- Select an image format.
Select "Fomat0" of "ImageFormatSelector" register.
- Set image size and image start position
Set the following value to "Width", "Height", "OffsetX", "OffsetY" registers. Setting value is Integer type.
"Width", "Height" registers are image size setting. "OffsetX", "OffsetY" registers are image start position
setting.
● Note
Changing "Width", "Height", "OffsetX", "OffsetY" register value is invalid during image stream data output.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Model
Width unit size
Height unit size
Minimum unit size
Maximum unit size (*)
OffsetX unit size
OffsetY unit size
32 / 65
BU406M
4
2
64x64
2048x2048
4
2
* initial factory setting
D4223121B
www.toshiba-teli.co.jp
Advertisement
Table of Contents
