Toshiba BU406M Instruction Manual page 48

● Registers
Register
UserSetSelector
UserSetLoad
UserSetSave
UserSetDefault
● Setting
- Select a bank of a user setting
Set the following value to "UserSetSelector" register. The setting value is Enumeration type.
Select the bank of user setting for "UserSetLoad" and "UserSetSave".
setting value
UserSet0 (*)
- Load/Save a user setting
When execute "UserSetLoad", the camera loads user setting from the bank selected in "UserSetSelector"
register and applies them.
When execute "UserSetSave", the camera saves user setting to the bank selected in "UserSetSelector"
register.
- Load a user setting at the time of start-up
Set the following value to "UserSetDefault" register. The setting value is Enumeration type.
The camera loads user setting from the bank selected in "UserSetDefault" register and applies them at the
time of next start-up.
"UserSetDefault" register value is stored to non-volatile memory when it is selected.
● Note
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Visibility Access
Beginner R/W Selects a bank of user setting.
Beginner W Executes load a user setting.
Beginner W Executes to save a user setting.
Beginner R/W Selects a bank of user setting when camera powers up.
Select memory bank 0 for user setting.
setting value
Default (*) Memory bank to read initial factory setting data.
UserSet0 Memory bank 0 for user setting.
Description
Description
47 / 65
Description
Save Load
○ ○
* initial factory setting
* initial factory setting
www.toshiba-teli.co.jp
D4223121B