Table of Contents
Advertisement
- Edge mode (TriggerSequence0)
The exposure time is determined by Exposure Time setting.
- Level mode (TriggerSequence1)
The exposure time is determined by the pulse width of the trigger signal.
- Bulk mode (TriggerSequence6)
Camera exposes and transfers multiple frames by a single trigger.
Operation point of HardwareTrigger is at the edge of trigger signal, and active edge polarity is able to change
by register setting. And you can add delay time from trigger edge to exposure start by register setting.
Details of Random Trigger Shutter operation, refer to "Timing" of "Specification".
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Fig. Trigger sequence
Fig. Trigger Delay
43 / 65
D4223121B
www.toshiba-teli.co.jp
Advertisement
Table of Contents
