SETTINGS
Setting the time
When connecting up the hi-fi system to the main power supply for
the first time, switch to standby mode. The time appears in the
display.
Briefly press »
1
necessary.
– The time moves forwards or backwards in one minute steps
or
press and hold down »
– The time moves forwards or backwards at rapid run-through.
Note:
The hi-fi system has an integrated lithium cell. This ensures that
the set time always remains the same even if the power plug
has been pulled out.
Setting and storing radio stations
Automatic station search
Switch on the hi-fi system by pressing »
1
Press »SOURCE« to select TUNER as the input source.
2
3
Select the frequency band (FM1, FM2 or AM) with »BAND«.
– Display: »
Activate the station search by pressing and holding down
4
»
8
« or »
run-through.
– The search stops when a station is found.
Manual station search
Press »
1
8
up in steps.
– Display: the frequency changes in 50 kHz steps (FM) and
9 kHz steps (MW).
______________________________________________
+
« or »
–« on the hi-fi system as often as
+
« or »
«, »
« or »
9
« until the frequency display changes to rapid
« or »
« briefly several times to move the frequency
9
–« on the hi-fi system.
ON/OFF«.
«.
17