Table of Contents
Advertisement
CR2025
16
CONNECTION AND PREPARATION
Putting the battery in the remote control
Pull off the film from the battery.
1
2
Pull out the battery holder.
When inserting the battery (3 V, lithium), make sure the positive
3
terminal (+) is facing upwards and the buttons on the remote
control are facing downwards.
Push the battery holder back into the remote control until it
4
latches into place.
Note:
If the device no longer reacts properly to remote control com-
mands, the battery may be flat. Always remove used batteries.
The manufacturer accepts no liability for damage caused by
leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
Advertisement
Table of Contents
