Rds Information - Grundig CDS 5000 DEC User Manual

TUNER MODE
Selecting the tuner input source
Press »SOURCE« to select TUNER as the input source.
1
– The most recently selected channel is activated (Last Station
Memory).
– Display: e.g. »
Selecting a preset
Select the frequency band (FM1, FM2 or AM) with »BAND«.
1
Select the preset with
2
– Display: for example, »
station name.
Stereo/mono reception
If the hi-fi system is set to FM stereo reception, the red LED
»Z STEREO« lights up. If the signal from the FM stereo channel is
weak, you can improve the sound quality by switching to mono
reception.
1 Press »JOG« to open the jog menu.
– Display: »
Select the »
2
as necessary.
3 Make the »
or »–
– The red »Z

RDS information

RDS (Radio Data System) is an information system which is trans-
mitted additionally by most FM stations.
When the hi-fi system receives an RDS station, the station name
appears in the display, for example »
Note:
It may take some time before all the RDS information is avail-
able.
Searching for RDS stations
1 To search for an RDS station, press »
necessary.
– If the reception is strong enough, the station name appears
after a short time.
_______________________________________
« or »
»1 ...
8«.
« with the frequency or the
«.
« setting by pressing »JOG« as many times
+
« setting using »
+
« on the hi-fi system.
MONO« LED lights up.
«.
– « on the remote control
«.
8 « or » 9 « as often as
21