Advertisement
4 4 Changing DTL B.FREQ (detail boost frequency)
This is an item to set the thickness of the image outline.
Move the " " to DTL B.FREQ by pressing [MENU UP], [MENU DOWN] buttons.
Select the detail boost frequency by pressing [DATA UP], [DATA DOWN] buttons.
4 5 Changing master pedestal
Move the " " to M. PED by pressing [MENU UP], [MENU DOWN] buttons.
Select the desired value of the master pedestal by pressing [DATA UP], [DATA DOWN] buttons.
M. PED decreases.
5 MATRIX(Matrix color correction)
Red hue setting
Red gain setting
Green hue setting
Green gain setting
Blue hue setting
Blue gain setting
5 1 Changing Matrix color correction ON/OFF
Move the " " to MATRIX by pressing [MENU UP], [MENU DOWN] buttons.
Select either ON or OFF by pressing [DATA UP], [DATA DOWN] buttons.
5 2 Changing MATRIX setting
Move the " " to the desired item by pressing [MENU UP], [MENU DOWN] buttons.
Select the desired value of color by pressing [DATA UP], [DATA DOWN] buttons.
* When matrix color correction is set to OFF, the color cannot be adjusted.
[ DATA UP ]
(thick outline)
LO W
N O R M A L
[ DATA DOWN ]
[ DATA UP ]
- 12 8
0
[ DATA DOWN ]
Move up and down
by pressing
MENU UP,DOWN
-- 5 MATRIX --
MATRIX
R HUE
R GAIN
G HUE
G GAIN
B HUE
B GAIN
[ DATA UP ]
- 15
[ DATA DOWN ]
(thin outline)
HIGH
M. PED increases.
127
Select the desired
value by pressing
DATA UP,DOWN
(FILE A)
ON
0
Ye HUE
0
0
Ye GAIN
0
0
Cy HUE
0
0
Cy GAIN
0
0
Mg HUE
0
0
Mg GAIN
0
0
15
23
Matrix color correction
ON, OFF
Yellow hue setting
Yellow gain setting
Cyan hue setting
Cyan gain setting
Magenta hue setting
Magenta gain setting
Advertisement
