Specifications - Toshiba Ik-Hr1Cs Instruction Manual

9. SPECIFICATIONS

*Below are specifications when this camera control unit is used with the Toshiba full HD color camera head IK-HR1H.
Image sensor
Output pixels
Signal system
Scan frequency
Sensitivity
Minimum illumination
Output signal
Sync system
White balance
Gain
Scene file
Remote control
Power supply
Power consumption
Weight
External dimension
Operating temperature
Operating humidity
Option
Design and specifications are subject to change without notice.
1/3 inch color CMOS sensor (Rolling shutter)
Horizontal : 1920, Vertical : 1080 (max.)
1080/59.94i 1080/50i 720/59.94p 720/50p
Horizontal : 33.72kHz, Vertical : 59.94Hz (when set to 1080/59.94i)
Horizontal : 28.13kHz, Vertical : 50Hz (when set to 1080/50i)
Horizontal : 44.96kHz, Vertical : 59.94Hz (when set to 720/59.94p)
Horizontal : 37.50kHz, Vertical : 50Hz (when set to 720/50p)
F 4 standard (2000 lx, 3000K)
8 lx standard (50 IRE, F1.4, gain
gamma setting ON (setting value 0), 3000 K)
HD-SDI (SMPTE292M), 0.8 V (p-p) standard 75 ohms unbalanced BNC connector
Internal
ATW Automatic tracing white balance , AWB Automatic white balance ,
MANUAL Manual
MANUAL (Manual), OFF (0 dB)
A, B, C, D, E
Serial data interface (RS232C)
12V DC 10%
Approx. 5.5 W (including the camera head)
137 g (0.302 lbs)
44(W) × 44(H) × 77.4(D) mm (1.73"(W)
0 to 40 (32 F to 104
Less than 90% (non condensing)
IK-HR1H (1/3 inch full HD color camera head)
EXC-HR03 (Camera cable Approx. 3m (Approx. 9'10"))
EXC-HR05 (Camera cable Approx. 5m (Approx. 16'5"))
EXC-HR10 (Camera cable Approx. 10m (Approx. 32'10"))
18 dB,
1.73"(H)
F)
26
3.05"(D) )