Connecting An Antenna Or Cable Tv (No Box) - Dynex DX-26L100A13 User Manual

Making connections
Using composite video (good)
To connect a cable or satellite box using composite
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a composite (A/V) cable (not provided) to
the VIDEO IN jack and L/R AUDIO jacks on the side
of your TV and to the composite video and audio out
jacks on the cable or satellite box.
4
Turn on your TV, then turn on the cable or satellite
box.
Cable or satellite box
75 ohm coaxial cable
Side of TV
Cables are often
color-coded to match
color-coded jacks.
Connecting an antenna or cable TV (no
box)
To connect an antenna or cable TV (no box):
1
Turn off your TV and all connected equipment.
2
Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the side of your TV and to the
antenna or cable TV wall jack.
Side of TV
3
Turn on your TV.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
11
DX-26L100A13
Coaxial cable