Remote Control - Dynex DX-46L260A12 User Manual

6
DX-46L260A12

Remote control

# Button Description
Press to open the Source List, then press
or to cycle through the available input
1 sources. For more information, see
INPUT
"Selecting the video input source" on
page 16.
Press to enter channel numbers and the
2
Numbers
parental control password.
Press to enter a digital sub-channel number.
3 For more information, see "Selecting a
channel" on page 17.
Press to display TV status information, such
as the channel number, channel name (if
4 available), or signal source. For more
INFO
information, see "Viewing channel
information" on page 18.
Press to confirm selections or changes.
5
ENTER
Press to open the on-screen menu.
6
MENU
Press to increase or decrease the volume.
7
VOL +/VOL –
Press to mute the sound. Press again to
8 MUTE
restore the sound.
# Button Description
Press to select the aspect ratio. For more
9 ZOOM information, see "Adjusting the TV picture"
on page 18.
Press to select the video modes. You can
select Vivid, Standard, Energy Savings,
10 Theater, Sports, or Custom. For more
PICTURE
information, see "Adjusting the TV picture"
on page 18.
Press to set the sleep timer. You can select
Off, 5, 10, 15, 30, 60, 90, 120, 180, or 240
11
SLEEP
minutes. For more information, see "Setting
the sleep timer" on page 28.
Press to select the sound mode. For more
12 information, see "Adjusting sound settings"
AUDIO
on page 19.
Press to turn your TV on or off (Standby
mode). When your TV is off, power still flows
13
(power)
into it. To disconnect power, unplug the
power cord.
In TV mode, press to return to the previous
14
RECALL
channel.
Press to display the program guide. For more
15 information, see "Viewing channel
GUIDE
information" on page 18.
Press to move left, right, up, or down in
16
on-screen menus.
Press to close the on-screen menu.
17
EXIT
Press to change TV channels to the next
higher or next lower channel. For more
18
CH +/CH–
information, see "Selecting a channel" on
page 17.
Press to open the Favorite Channel list. For
more information, see "Setting up a favorite
19 FAVORITE
channel list" on page 20 and "Viewing a
favorite channel" on page 21.
TV—Press to control your TV.
COMP—Press to select the device
connected to the COMPONENT video jacks.
VIDEO--Press to select the device connected
to the AV IN video jack.
20
Video input
HDMI—Press one or more times to select
the device connected to the HDMI 1 or
HDMI 2 jack.
VGA—Press to select the device connected
to the PC IN VGA jack.
Press to open the channel list.
21 CH-LIST
Press to turn closed captioning on or off. You
can select CC Off, CC On, or CC On when
22
CCD
Mute. For more information, see "Using
closed captioning" on page 25.
Press to select the audio mode for an analog
program. You can select:
• MONO—Select this option if there is
23 MTS/SAP
noise or static on weak stereo
broadcasts.
• STEREO—Select this option for
programs broadcast in stereo.
TV components