Table of Contents
Advertisement
Settings with switches and jumpers
Settings with switches and jumpers
Switch 1 = must be set to
Switch 2 = System BIOS recovery
i
The clock frequency of the processor is set automatically.
Recovering System BIOS - switch 2
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore
the old system BIOS you need a Flash BIOS Diskette (please call our customer service centre).
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-
On
Diskette" restores the System BIOS on the system board.
Normal operation (default setting).
Off
Write protection for floppy disks - switch 3
Switch 3 is used to define whether floppy disks can be written or deleted in the floppy disk drive. To
write and delete floppy disks, the write-protection in BIOS Setup must be disabled (in menu Security,
the field Diskette Write must be set to Enabled).
On
The floppy disk drive is write-protected.
Off
Floppy disks can be read, written and deleted (default setting).
10 - English
DIMM 2
DIMM 1
off
Switch 3 = Write-protection for floppy disk
Switch 4 = must be set to off
4
3
2
1
ON
A26361-D1215-Z120-6-7419
Hide quick links:
Advertisement
Table of Contents
