Table of Contents
Advertisement
Stp/Sto/Clr
EL
Set
Rcl/View
Mode/Nxt
Str/Lap/TZ
(III) Modes and Functions
User Profile Mode
The unit allows you to set a maximum of 10 user profiles and share
the sample memory. Each user has their own settings without affecting
the others.You can select user profile from the watch or by using the
Acumen software.
If you have selected another user profile,
you need to set Age, Weight and Target Zone
again.
- Press Str/Lap/TZ button to view in Time
select others by pressing Stp/Sto/Clr or Rcl/
View button.
Time Mode
You can get the following information in this mode:
• Time, Date, Month and Weekday.
• Heart Rate with audible and visual Target
Zone Alarm if the Target Zone Alarm is on.
• "
" icon indicates Time Alarm status.
• " " icon indicates Hourly Chime status
• View the watch ID.
Operation in this mode:
- Press and hold Rcl/View button to view the current exercise session.
- Press and hold Str/Lap/TZ button to view the Watch ID.
Note: You may change your Watch ID by using the Acuman Software.
Setting the Time
You can set 12/24 Hour Mode, Hour, Minute, Second, Year, Month
and Date.
5
• Press Mode/Nxt button to toggle
between modes.
• Press Set button to enter or exit
Setting Modes.
• Press Str/Lap/TZ button to select
User Profiles while in the Time
Mode.
Note: If no button is pressed for 60
sec, the watch will automatically
exit the setting mode.
- Press Set button to enter or exit the Time Setting.
- Press Mode/Nxt button to toggle between parameters.
- Press Stp/Sto/Clr or Rcl/View button to increase/decrease
parameters. (the Second will be reset to zero)
Note: weekday is auto-set based on the date and month entries.
Pace Mode
The Pace feature is a programmable beeping sound which allows
you to set beeping rhythm for use as guidance to regulate your
exercise, keep your exercise pace in sync with that rhythm.
You can get the following information in this mode:
•Pace speed in BPM (beats per minute).
• Pacer status: ON, OFF, AUTO.
"ON" is displayed when you want to
turn the Pacer on continuously and you
will need to manually turn "OFF", or switch
to "AUTO" when you want to control it
by the stopwatch.
• Turn the "HRC ON" allows you to control the pacer by your heart
rate and the pace speed will slow down or speed up automatically
when your heart rate is above or below the Target Zone.
• Heart Rate with audible and visual Target Zone Alarm if the Target
Zone Alarm is on.
Operation in this mode:
- Press Stp/Sto/Clr or Rcl/View button to change the Pacer status.
Setting the Pacer
You can set Pace Speed and turn HRC ON/OFF.
- Press Set button to enter or exit the Pacer Setting.
- Press Mode/Nxt button to toggle between parameters.
- Press Stp/Sto/Clr or Rcl/View button to adjust parameters.
Chrono Mode
The unit records your exercise data by running the stopwatch. The
delay feature allows you to delay the stopwatch each time when you
press the start button. It's helpful in trying to synchronize with a
separate countdown timer or for practicing starting on cue.
Display valid record capacity
Pace Speed
Pacer Status
6
Advertisement
Table of Contents
