Print Server Management Using The Reset Button; Reset The Print Server; Print A Test Page - Axis USB Wireless G User Manual

Print Server Management

Print server management using the Reset button

Reset the Print Server:

Print a Test Page

28
The reset button can be used for several operations, see Print Server Setup, on
page 8 for the physical location of the Reset button.
1. Verify that the DIP switch is on "Nor."
2. Press the reset button once.
WARNING! This will restart the print server and stop all on-going and pending print
jobs!
The DIP switch can be set on either "Nor." or "Diag."
1. Hold down the reset button for 5 seconds.
2. The test page will be printed on the connected printer.
The test page displays information on these parameters:
• Device Name (print server name)
• Firmware version
• MAC address
• IP address
• Subnet Mask
• Default Router
• SSID
• Channel
• WPA-PSK enabled or disabled
• AppleTalk enabled or disabled
• AppleTalk Port Name
• Rendezvous enabled or disabled
• Rendezvous service name
• Site survey
AXIS OfficeBasic USB Wireless G