Print Server Management Using The Reset Button - Axis OfficeBasic USB Wireless User Manual

Print Server Management Using the Reset
Button
The reset button can be used for several operations:
Print a test page:
1. Verify that the DIP switch is on "Nor."
2. Hold down the reset button for 5 seconds. The test page will be
printed on the connected printer.
The test page displays information about e.g. the print server's IP
address, MAC address, subnet mask, default gateway.
Reset:
1. Verify that the DIP switch is on "Nor."
2. Press the reset button once.
WARNING! This will restart the print server and stop all on-going and
pending print jobs!
Perform a Factory Default:
1. Verify that the DIP switch is on "Nor."
2. Disconnect the external power supply.
3. Hold down the reset button and reconnect the external power
supply.
4. Wait until the orange and green LED indicators have blinked
twice simultaneously.
5. Release the reset button.
6. The print server will restart.
21