Maintenance; Restart - Axis USB Wireless G User Manual

Maintenance

Factory Default
Firmware Upgrade

Restart

AXIS OfficeBasic USB Wireless G
Click Factory Default then OK to reload all default settings in the print server.
• Performing a Factory Default will erase all settings of the print server to
default and should be performed with caution!
• After performing a Factory Default, the default wireless settings will be:
• Infrastructure mode
• SSID = <ANY> (will connect with the Access Point that has the best
signal in your wireless network)
• Data transmit rate = Auto
• Transmit mode = Auto
• Authentication Type = Open System
• Channel = 6
• DHCP enabled
Click Firmware Upgrade to browse to your firmware directory and reload the
print server with new firmware. (You must first download firmware from
www.axis.com/techsup/firmware, select the appropraite print server model
and click Download flash file. Save the firmware flash file locally on your
computer or in a network directory.)
Click OK to restart the print server. The print server can also be restarted by
disconnecting and the re-connecting the external power supply, or by pushing
the external Reset button once.
Print Server Management
27