Using A Web Browser For Print Server Management - Axis 5800 User Manual

AXIS 5800+ Mobile User's Manual

Using a Web browser for Print Server Management

User
Admin
Note:
Accessing the
Web Pages
Section 11 Management and Configuration
Once you have established the AXIS 5800+ Mobile in the TCP/IP
environment, as described in Assign an IP address to the print
server on page 23, you are free to access the AXIS 5800+ Mobile
Web pages from any Java enabled Web browser.
The Web interface of the AXIS 5800+ Mobile is divided into two
modes of operation: User mode and Admin mode.
In User mode, you have no rights to change any parameter
settings. This mode is intended for regular users who are only
interested in using the print server's interface for checking print
jobs or viewing printer properties. If you want to change any
other of the print server's settings, you must enter the Admin
mode.
When in Admin mode, you have access to all the print server's
parameters and you can change them to your liking. This mode
is intended for network administrators and is password protected
to prevent unauthorized changing of the print server parameters.
• If the ROOT_PWD parameter is set to pass, which is the default
value, you have access to the User mode as well as the Admin
mode.
Follow the steps below to access the internal home page of the
AXIS 5800+ Mobile.
1. Start your Web browser.
2. In the Location/Address field, type the host name or the IP
address of your AXIS 5800+ Mobile:
103